OSHA awards more than $6.7M in worker safety, health training grants

Why EPA wants to eliminate paper manifests

EPA’s reasoning is pretty straightforward. Paper manifests are slower, easier to lose, and more prone to errors. They rely on manual handling and delayed processing, which can create gaps in tracking and compliance. A fully electronic system, on the other hand, allows for real-time visibility, standardized data entry, and faster correction of mistakes. It also gives regulators a clearer, more immediate picture of what’s happening across the entire waste life cycle.

Addressing one of the biggest digital barriers: signatures

One overlooked part of the proposed rule is how EPA is trying to solve one of the biggest barriers to going fully digital, which is signatures in the field. Anyone who has dealt with manifests knows that the weak point is often the hand-off between the generator and the transporter, especially when drivers don’t have system access or reliable connectivity.

To address that, EPA is proposing new functionality that would allow users to sign manifests using quick response (QR) codes or even short message service (SMS). In practice, this could mean a driver scans a QR code or receives a text prompt and then completes the signature process directly on the phone. So, no login or full system access is needed. EPA is also exploring the ability to use SMS and QR-based tools to make updates to manifest data without needing full system permissions. That’s a big deal operationally because it removes one of the most common bottlenecks in needing a registered user at a specific site to make even minor corrections.

Operational challenges companies should expect

With that said, moving to a fully digital system still comes with potential issues. It requires coordination across your entire operation. Generators, transporters, and disposal facilities all have to be aligned and capable of using the system effectively. If one party in that chain struggles, it can create delays or compliance issues for everyone involved. There’s also an upfront investment to consider. Companies may need to upgrade internal systems, ensure reliable connectivity, and train employees in new work processes. For organizations with multiple sites or field operations, this can take some planning. But over time, many of those burdens are expected to decrease. Electronic signatures, reusable templates, and centralized recordkeeping can significantly reduce administrative work.

One of the biggest shifts employers will notice is the level of visibility. With paper manifests, there’s often a lag between shipment and final documentation. In a digital system, that lag disappears. Information becomes available almost immediately, and regulators have access to the same data. That means errors or discrepancies are easier to find and harder to ignore.

The good news is that companies don’t have to wait for the final rule to start preparing. Taking a close look at your current manifest process is a good first step. If paper is still a major part of your workflow, that’s a clear signal that changes are coming. Making sure your e-Manifest account is fully set up and that employees understand how to use it will go a long way in avoiding future disruptions.

Keys to remember: The EPA’s proposed Paper Manifest Sunset Rule would set a firm date to phase out paper hazardous waste manifests and require that all covered shipments be tracked through the agency’s electronic e‑Manifest system, through which the Agency says will improve hazardous waste tracking and transparency while reducing administrative burden and saving regulated entities roughly $28.5 million per year.

The regulatory basis for incinerator permitting

Most incinerators fall under Section 129 of the CAA, which mandates EPA to establish performance standards and emission guidelines for categories of solid waste combustion units. These standards govern pollutants such as particulate matter, carbon monoxide, sulfur dioxide, nitrogen oxides, lead, cadmium, mercury, hydrogen chloride, and dioxins/furans. Operators must also conduct emissions testing, maintain continuous monitoring equipment, track operational parameters, and submit regular compliance reports.

Permitting generally occurs through Title V operating permits, which consolidate all applicable air quality requirements into a single enforceable document. A Title V permit typically requires annual certifications, detailed recordkeeping, periodic emissions tests, and reporting of deviations. While the Title V program doesn't impose new standards, it ensures that incinerators comply with all existing federal and state air quality rules.

Different categories of incinerators, such as large municipal waste combustors (LMWC), small municipal waste combustors (SMWC), commercial and industrial solid waste incinerators (CISWI), and other solid waste incinerators (OSWI), have distinct requirements. These subcategories reflect variations in unit size, waste composition, and operational design, and each has its own subpart under EPA’s air quality regulations.

Air curtain incinerators: A special case

Air curtain incinerators (ACIs), which burn wood waste, yard debris, and clean lumber, occupy a niche segment of the permitting landscape. They use a mechanized “curtain” of air to increase combustion efficiency and reduce particulate emissions compared to open burning. However, their regulatory treatment has historically been inconsistent.

Because ACIs fit partly within several existing subparts, operators often face confusion about which monitoring, opacity limits, and reporting duties apply. Overlap across four regulatory categories can create delays, particularly during emergencies when ACIs are deployed to remove vegetative fuels that increase wildfire risk or to process debris after storms.

EPA’s emergent focus on streamlining

In March 2026, EPA announced a proposal to consolidate the regulatory requirements for ACIs used solely to burn wood-derived materials into a single subpart under Section 129 of the CAA. The proposal would also allow these ACIs to operate without a Title V permit unless located at a facility that otherwise requires one.

EPA stated that the change would “cut red tape” and provide clarity for state, local, and Tribal governments, allowing them to respond more effectively to natural disasters and conduct wildfire mitigation activities without unnecessary administrative delays. The agency emphasized that unprocessed debris contributes to poor air and water quality and poses safety risks, particularly in post disaster environments.

Context: Broader federal actions on disaster-related incineration

The proposal follows earlier federal steps to ease the temporary use of incinerators during emergencies. In 2025, EPA issued an interim final rule permitting CISWI units to burn nonhazardous disaster debris for up to 8 weeks without prior EPA approval, a provision intended to accelerate cleanup after hurricanes, wildfires, and floods. These units must still operate their pollution control equipment, and extensions beyond 8 weeks require EPA authorization.

Such measures reflect the increasing volume of debris associated with severe weather events and the need for rapid, environmentally sound disposal mechanisms. The current proposal for ACIs builds on these efforts by targeting the specific regulatory bottlenecks associated with vegetative and wood waste disposal.

Looking ahead

EPA’s streamlined permitting proposal doesn't alter emission standards but rather clarifies and simplifies administrative pathways. If finalized, it may make ACIs more accessible during periods of heightened wildfire risk and in the critical early stages of disaster recovery.

Key to remember: At its core, the permitting system for incinerators aims to balance environmental protection with operational flexibility. The new proposal underscores EPA’s recognition that, in emergency contexts, speed matters but so does environmental stewardship.

What does this mean?

Manufacturers (including importers) of motor vehicles and motor vehicle engines no longer have future obligations to measure, control, report, or comply with federal GHG emission standards for any highway vehicle or engine, including for previously manufactured MYs.

Specifically, the final rule removes the requirements for controlling GHG emissions, which include:

• Emission standards;
• Test procedures;
• Averaging, banking, and trading requirements;
• Reporting requirements; and
• Fleet-average emission requirements.

Additionally, the final rule eliminates off-cycle credits for manufacturers that added certain technologies to their vehicles and engines (like waste heat recovery) and EPA’s incentives for manufacturers to install a start-stop system (which automatically shuts off a vehicle’s engine when idling).

When do the changes apply?

The final rule takes effect on April 20, 2026. However, a legal challenge has already been brought against the rulemaking, and more litigation is likely.

It’s important to keep an eye on the status of the rule. Legal challenges could result in changes to the rule, such as delaying its effective date.

What regulations were removed?

The final rule repeals all GHG emission regulations in 40 CFR:

• Parts 85, 86, and 600 (light- and medium-duty vehicles);
• Part 1036 (heavy-duty vehicle engines); and
• Part 1037 (heavy-duty vehicles).

Why did EPA remove the standards?

The road to reversal begins in 2009. That’s when EPA issued two findings: the Endangerment Finding and the Cause or Contribute Finding. Collectively, these findings are referred to as the 2009 Endangerment Finding. The agency used the 2009 Endangerment Finding as the legal basis under Section 202(a) of the Clean Air Act (CAA) to regulate GHG emissions from new motor vehicles and motor vehicle engines based on global climate change concerns.

However, upon reconsideration, EPA no longer believes that it has the statutory authority under Section 202(a) of the CAA to regulate GHG emissions from new motor vehicles and motor vehicle engines in response to global climate change concerns. The agency bases its determination on three factors:

• EPA concludes that the best reading of Section 202(a) of the CAA authorizes the agency to regulate air pollution that threatens to endanger health and welfare through local and regional exposure. Therefore, the CAA doesn’t give EPA the authority to regulate GHG emissions based on global climate change concerns. The agency conducted the “best reading” by using standard interpretation principles and being informed by the Supreme Court’s overturning of “Chevron deference” in Loper Bright Enterprises v. Raimondo (2024).
• EPA lacks the congressional authorization required to regulate GHG emissions based on global climate change concerns. The agency determined that the major questions doctrine (i.e., federal agencies may not decide issues of major national significance without clear authorization granted by Congress) applies to the 2009 Endangerment Finding and that Congress doesn’t give EPA the authority under Section 202(a) of the CAA to decide a national policy response to global climate change concerns.
• The GHG emission regulations don’t and can’t have a meaningful impact on the identified health and welfare dangers that the 2009 Endangerment Finding attributed to global climate change. EPA based this conclusion on the results of climate impact modeling that the public submitted in response to the proposed rule and on the agency’s modeling analysis used to evaluate the submissions.

By rescinding the 2009 Endangerment Finding, EPA has no legal basis to regulate GHG emissions from new motor vehicles and motor vehicle engines. Accordingly, the final rule also repeals all GHG emission standards for light-, medium-, and heavy-duty vehicles and heavy-duty engines.

Key to remember: EPA’s final rule eliminates the 2009 Endangerment Finding and the related GHG emission requirements for on-highway vehicles and vehicle engines.

The rule overview

The STHAF rule is found in 21 Code of Federal Regulations Part 1 and applies to vehicles, transportation equipment, operations, training, and records involved in food transportation.

STHAF high-level requirements include:

• Vehicles and equipment used to haul food must be suitable, sanitary, and cleanable.

• Equipment must be always kept clean and sanitary.

• Trailers, totes, tanks, pallets, hoses, and pumps must be designed and maintained to prevent contamination.

• For temperature - controlled foods, equipment must maintain required temperatures throughout transport.

• Vehicles must be maintained to prevent pest harborage (e.g., rodents, insects), and contamination from damage (e.g., exposed insulation).

Shipper responsibilities

Shippers have the ultimate responsibility for the sanitary transportation of their food but may assign duties to carriers through written agreements. This means that carriers should be prepared to follow shipper requirements for:

• Cleaning and sanitation,

• Temperature control and reporting in-transit, and

• Inspection procedures at origin and destination.

Carriers may also be delegated responsibility for ensuring:

• Vehicles meet shipper specifications;

• Required cleaning and sanitizing is done;

• Vehicles are properly precooled before loading;

• Food segregation from raw food or non-food items;

• Temperature is monitored and documented during transit; and

• Proof of prior cargo and most recent cleaning is provided for bulk vehicles, if requested.

Loader and receiver responsibilities

Loading and receiving facilities have a responsibility for maintaining temperature-sensitive food safety, as well.

Loaders must:

• Inspect vehicles, trailers, and containers for sanitary conditions, and

• Verify trailers are adequately precooled.

Receiver must:

• Check for in‑transit temperature abuse,

• Verify food and vehicle temperatures, and

• Inspect for unusual odors.

Carrier policies and procedures

The rule doesn’t prescribe how cleanliness and sanitary conditions must be maintained. That depends on carrier policies and procedures along with following express requirements set forth in shipper contracts.

Basic carrier policies and procedures should cover areas, such as:

• A mandate to repair interior damage immediately;
• Prohibitions against using wooden floors and walls due to sanitation and splinters, as well as using contaminated dunnage;
• Trailer and container sanitation procedures after every haul;
• The proper separation to prevent cross-contamination;
• Precooling and temperature monitoring and reporting;
• No reuse of contaminated packaging or securement material (dunnage);
• Good hygiene by loaders and drivers, like clean clothing, handwashing, or beard nets (if required).

Training and recordkeeping

Unless assigned to the carrier by agreement, shippers must ensure drivers are trained at-hire and on a recurring basis on the following topics:

• Awareness of food safety risks during transport,

• Sanitary transportation practices, and

• Applicable food safety regulations.

Carriers must maintain records for:

• Written agreements with shippers,

• Required procedures, and

• Driver training.

Record retention guidance:

• Keep records while effective, plus 12 months;

• Records may be electronic or paper;

• Must be available within 24 hours upon request; and

• Cleaning and inspection procedures must be available onsite.

Notification of unsafe food

If a failure (e.g., temperature deviation or contamination) renders food unsafe:

• The party responsible must notify all others involved, and

• The food cannot be sold or distributed.

The only exception is if a qualified individual determines the food is still safe for consumers.

Keys to remember: Shipper, receiver and carrier adherence to sanitation procedures, is key to keeping food safe for consumption. The STHAF rule makes food safety a shared responsibility every mile of the trip.

Motor carrier responsibilities

Under DOT drug and alcohol testing rules, “actual knowledge” occurs when an employer learns of drug or alcohol use based on specific scenarios, including a traffic citation for DUI in a CDL commercial motor vehicle (CMV). A traffic citation includes a ticket, complaint, or other document charging a driver.

An employer’s actual knowledge of a Part 382 violation is treated the same as any other drug or alcohol violation (e.g., failed test, refusal to test). The motor carrier must:

• Pull the driver from all safety-sensitive functions (SSFs),
• Provide the driver with a list of substance abuse professionals, and
• Report the actual knowledge to the Drug and Alcohol Clearinghouse.

The driver’s Clearinghouse status is changed to Prohibited at this point.

Even if the driver wants to fight the charges in court, the driver can’t resume SSFs. Instead, the driver must complete the return-to-duty (RTD) process, get the citation dismissed, or be adjudicated not guilty.

Drivers who are convicted of DUI in a CDL CMV must comply with the RTD requirements and follow-up testing.

DUIs that result in ‘non-convictions’

Suppose your driver wins in court. The Federal Motor Carrier Safety Administration (FMCSA) won’t enforce the RTD process for the DUI when the citation results in a non-conviction.

The term “non-conviction” means that the charge of DUI in a CMV is dismissed without the imposition of fines, court costs, or other punitive actions, or there is an unvacated adjudicated finding of not guilty. Terms that states may use to indicate a dismissal include:

• Nolle Prosequi (Nolle Pros’d or Nolle Prossed),
• Withdrawn, or
• Discontinued.

The term “non-conviction” does not include pleading guilty to a lesser charge (e.g., reckless driving).

Petitioning FMCSA

Does FMCSA automatically update the driver’s record following a non-conviction? No, the court system doesn’t notify FMCSA of the case’s final disposition. The driver must notify FMCSA of the non-conviction by submitting a petition along with documentation. Documentation may include:

• A certificate of disposition from the court,
• A letter from a prosecutor stating that the charge has been dropped, or
• A screenshot from a court online docket system that displays the disposition.

A statement from the driver, even if provided in the form of an affidavit, will not be considered unless accompanied by documentary evidence.

The driver may resume safety-sensitive functions when FMCSA accepts the evidence and changes the Clearinghouse status from Prohibited to Not Prohibited.

The driver whose charges resulted in a non-conviction is no longer required to pursue the RTD program and follow-up testing.

Key to remember: An employer who learns of a DUI in a CDL CMV must report it as actual knowledge, even if the driver plans on challenging it in court. The driver can’t return to SSFs unless there is proof of a non-conviction or successful completion of the RTD process.

Impact on the workplace

The order doesn’t address how the rescheduling of medical marijuana impacts compliance with other federal laws, but to avoid the risk of a discrimination claim under the federal Americans with Disabilities Act, employers in states where medical marijuana is legal should treat individuals using medical marijuana as they would treat any individual using a prescription medication.

This includes having a discussion with the employee about accommodations, which may include off-duty use of medical marijuana.

In states where medical marijuana isn’t legal, employers would only need to consider accommodations for use of marijuana products approved by the FDA.

Recreational marijuana considerations

The order doesn’t legalize recreational marijuana, but does announce a June 29 hearing to evaluate broader changes to marijuana’s status under federal law.

The order notes that it doesn’t apply to synthetically derived THC, such as Delta-10 products. The final order notes that synthetically derived THC is outside of the definition of marijuana.

The order also establishes a federal licensing system for state medical marijuana manufacturers and dispensaries. It notes that states where medical marijuana is legal have established systems to regulate the sale and use of medical marijuana.

How does this affect safety-sensitive jobs?

The Drug Enforcement Administration’s reclassification order doesn’t address the impact the change would have on federal drug testing regulations. Specifically, it doesn’t offer insights into Department of Transportation (DOT) drug testing of truck drivers, airline pilots, pipeline operators, and others in safety-sensitive positions.

Before any changes can be implemented by the DOT, drug testing procedures in 49 CFR Part 40 must go through the rulemaking process.

Key to remember: The federal government has moved medical marijuana to a lower classification of drug. To reduce the risk of a discrimination claim, employers in states where medical marijuana is legal should treat it as a prescription medication to lower the risk of a discrimination claim. Employers in all states should consider accommodations for FDA-approved marijuana products.

Where documentation breaks down

Shipping papers are one of the most frequent sources of trouble. They’re essential, but they’re also complex, repetitive, and easy to get slightly wrong. A missing piece of information, an outdated description, or a mode-specific requirement that isn’t accounted for can quickly turn into a compliance issue.

Problems usually happen when something changes. A shipment moves from ground to air, an international leg is added, or a different carrier gets involved. Each change brings new requirements, and if paperwork isn’t rechecked carefully it can fall out of compliance fast.

Time pressure plays a role, too. When employees are focused on keeping freight moving, documentation can become a routine task instead of a true verification step. Small details like emergency response information or proper descriptions can be overlooked, even by experienced staff.

Labeling and placarding are familiar, but still vulnerable

Marking, labeling, and placarding issues are just as common. Missing labels, incorrect hazard classes, outdated markings, or placards that don’t match the paperwork continue to appear during inspections.

These errors often happen late in the process. Quantities change, packaging is adjusted, or materials are substituted, but labels and placards don’t always get updated to reflect those changes. When things look similar to past shipments, it’s easy to assume the markings are still correct without rechecking them.

Most of the time, this isn’t about a lack of knowledge. It’s about execution under pressure. Employees know labels and placards matter, but they still have to be current for that specific shipment, every time.

Simple checks that catch the problems early

Preventing these issues usually doesn’t require complicated processes or extra approvals. It comes down to building simple verification steps into daily workflows.

A second set of eyes on shipping papers can quickly catch missing or mismatched information. Taking a brief pause to confirm that labels and placards match the documentation usually prevents much bigger problems later. Short, consistent checks are far more effective than long, infrequent reviews.

Technology can help reinforce those checks as well. Shipping software and digital documentation tools can flag missing fields or inconsistencies before paperwork is finalized. When systems support decisions at the moment they’re made, accuracy improves and stress goes down.

Getting the basics right every time

When hazmat shipments go wrong, it’s usually because the basics didn’t line up. Documentation, labels, and placards all have to tell the same story. When one piece is off, everything else is at risk.

Hazmat shipping is inherently complex, but getting the fundamentals right doesn’t require perfection. It requires consistent attention to the details that matter most. When teams slow down just enough to verify the basics before a shipment moves, errors drop, inspections go more smoothly, and confidence goes up.

Key to remember: Most hazmat shipment issues come from small execution errors, not complex rules. Taking time to recheck paperwork and ensure labels and placards match the shipment can prevent most compliance issues.

Common, basic hand signals

To help avoid hazards, a spotter directs the commercial driver using hand signals to make a desired vehicle movement. To be effective and safe, the spotter and driver must speak the same language.

Unlike some industries such as construction, the hand signals used throughout the trucking industry are not standardized. Drivers and yard employees should be trained on common, basic hand signals.

When at a shipper or receiver’s facility, the driver obviously has less control over the situation. The company’s standardized hand signals may not be recognized. The driver needs to discuss agreed upon hand signals with the yard or warehouse employee who is directing the driver.

The more commonly used hand signals that should be standardized include:

• Pull forward to the left
• Pull forward to the right
• Back up
• Back up — driver’s side
• Back up — passenger’s side
• Distance to travel
• Stop
• Slow down
• Emergency stop

Above all, the stop signal needs to be clearly understood. It could make the difference between a safe docking and a crushed worker. Variations include both arms crossed with hands in fists, or hands straight up. In any event, the driver and spotter must agree on the stop signal, reinforced by yelling loudly to stop.

Driver’s safety measures

A driver should assess their surroundings before backing up and following a spotter’s directions:

• Walk around the commercial vehicle, making sure nothing is in the path of the tires;
• Observe people in the area;
• Check for obstructions in the cab that would block the line of sight of the mirrors; and
• Verify the position of the spotter (i.e., back of the trailer using the passenger-side mirror).

The driver must stop the vehicle immediately when:

• Unsure of the spotter’s signals. They must clarify the meaning before proceeding.
• Their attention is drawn away from the spotter (including looking away from the mirrors). They should continue only after confirming the last signal.

Spotter’s role

Spotters have their own safety concerns. They must be alert to:

• The position of the trucks, and
• Other hazards approaching or in the truck or trailer’s path.

To ensure their own personal safety, they should:

• Wear bright clothing or a vest,
• Be visible in the driver’s passenger mirror,
• Avoid walking backward while giving instructions to the driver,
• Assume a position that’s a safe distance from the truck,
• Make sure nothing will be in their walking path, and
• Keep eye contact with the driver at all times.

To make sure the driver knows where the spotter is at all times, they may need to change positions frequently so that they are visible in the driver’s passenger mirror.

Key to remember: A driver and spotter must effectively communicate to ensure the safety of the truck, spotter, and bystanders in busy yards and loading docks.

The potted plant test

Researchers tested their theory by going into an office at night and placing potted plants by the desks of some employees. They placed office supplies on other employees’ desks.

The employees who were exposed to this small dose of nature displayed higher job performance, an increased desire to help, and enhanced creativity. No one was negatively impacted.

Bringing nature indoors

Live plants can’t be part of every work setting, but they’re not the only way to bring the benefits of nature indoors.

Nature-related elements can include:

• Windows with views of nature
• Indoor water features
• Murals of natural scenes
• Artificial plants or flowers
• Fish aquariums

Design features related to nature can also be more significant and included in building plans. For example, investing in landscaping designs outside office windows or having an indoor garden are ways to positively impact employees.

These options don’t have to break the bank or require a pot of gold, however. Simply allowing employees to place potted plants by their desks is an inexpensive way to enhance the workplace.

With a little luck, everyone will reap the benefits for having a little more green nearby.

Key to remember: Bringing natural touches to the workplace can have a positive impact on job performance, cooperation, and creativity.

Shared versus individual handbooks

Nearly 60 percent of survey respondents bought one handbook (or a few) and shared them among employees, while 42 percent provided individual handbooks for each employee. Of those who purchased one or a few, they typically kept the handbooks in central or safety-related locations, such as:

• Main offices
• Safety or compliance offices
• EHS departments
• Classroom or training spaces
• Shared libraries near Safety Data Sheet binders or training areas
• Shop floors near work areas

Use in training programs

As mentioned, the majority of those surveyed said they use safety handbooks as part of new hire, ongoing, and refresher training. This includes the following uses:

• Building or supporting existing training programs
• Creating quizzes or review questions
• Supporting skills testing (e.g., forklift, ladder, PPE)
• Providing supplementary materials for:
  • Toolbox talks
  • OSHA 30 courses
  • Job-specific trainings (e.g., load securement, bloodborne pathogens, Federal Motor Carrier Safety Regulations)

Additional survey feedback

Open-ended survey responses highlighted that some companies prefer visual presentations or digital formats over print publications, with some expressing concern that hard copy materials may quickly become outdated. Others said they use handbooks only as background reference for the EHS team and see a need to increase handbook use in their company.

Key to remember: Safety handbooks can serve as a core part of safety and health programs by giving employees and supervisors a shared reference for training conversations and expectations.

What’s happening to the body?

No one is immune from extreme heat when controls are lacking. While some workers are more vulnerable (e.g., older workers, seasonal workers, or those not acclimatized to the heat), the human body still reacts to heat when temperatures soar.

As temperatures rise, the heart pumps harder to maintain core body temperature. Blood helps millions of sweat glands in the body to send moisture to the skin’s surface, allowing heat to evaporate into the air. This process is meant to cool the body. However, when it’s extremely hot and humid, the sweat glands just can’t keep up, and cooling becomes impossible without the additional help of cooling aids.

Humidity, or moisture in the air, prevents sweat from evaporating off the skin. This keeps the body from cooling effectively which can create overheating. As the body continues to overheat, it sweats more, which results in reduced blood volume and dehydration. This can quickly lead to two additional negative consequences:

1. Blood pressure drops. The heart is required to pump more to maintain pressure so blood can reach vital organs. When blood can’t effectively reach the lungs or brain, the body begins to shut down quickly and cognitive abilities can decrease rapidly or cease altogether.
2. Dehydration ensues. Typically, by the time you feel thirsty, you are already dehydrated. Continued fluid loss means the body has nothing to create sweat with to send to the skins surface.

A lack of blood flow to vital organs, along with dehydration, lead to poor decision-making and impaired judgment, which can result in serious workplace incidents; some of which can be fatal.

What are the warning signs?

The body will tell you when it’s in trouble. Heat exhaustion warning signs begin with symptoms such as:

• Excessive sweating;
• Cool, pale, or clammy skin;
• Light-headedness from a weak pulse;
• Nausea or vomiting;
• Muscle cramps; and /or
• Unusual irritability.

These are tell-tale signs that your body is dehydrated and starting to lose the ability to self-cool. If protective measures like hydration, rest, and external cooling aren’t taken right away, heat exhaustion can quickly become heat stroke. This can happen within minutes, creating a quick downward spiral to disorientation, unconsciousness, organ shutdown, and heart failure.

How can killer heat be stopped?

Heat can be deadly, but it doesn’t have to be. By applying these simple controls and safe work practices, you can help protect workers from life-threatening heat exposure:

• Water: Ensure workers consume at least 1 quart of suitably cool water per hour (or 8 oz every 15 minutes) during excessive heat. Avoiding caffeinated or sugary drinks will also help ward off dehydration.
• Rest: Encourage workers to take frequent breaks from the heat in artificially or naturally shaded areas, where there is air movement, or in an air-conditioned area.. Ensure break areas are as close as possible to the work area and are sufficient enough to hydrate, remove PPE, and cool down.
• Shade: Provide shade areas (e.g., tents), fans, air-conditioning, or cooling stations.
• Acclimatization: Gradually increase employee exposure over time so the body isn’t more stressed in the heat, then monitor workers closely during this time.
• Administrative controls: Plan more intensive work activities for cooler parts of the day, implement a buddy system for monitoring workers, and rotate workers so frequent breaks are possible. Monitor weather conditions so work can be adjusted accordingly.
• Clothing and PPE: Provide hats and cooling gear for workers and encourage them to wear lightweight, loose-fitting, and light-colored clothing.
• Training: Train workers to understand dangerous temperatures and how to recognize and respond to symptoms of heat stress.
• Be prepared! Implement a heat injury and illness prevention plan that includes quick medical access and care.

Keys to remember: Heat becomes lethal when the body’s cooling mechanisms fail, allowing core temperature to rise beyond control. Prevention methods are essential for halting heat stress that can trigger widespread cellular damage, inflammation, and organ failure.

Ladders feel safe, until they’re not

Ladders don’t usually trigger a sense of risk because they’re seen as a part of everyday work. When tasks feel quick and familiar, people don’t always stop reassessing the setup. That’s how unsafe ladder habits with big consequences can develop, including:

• standing on the top step “just for a second;”
• reaching too far instead of climbing down;
• using whatever ladder is closest, not the right one; and
• skipping ladder inspections because “it worked last time.”

Ladder safety isn’t going away, and that’s not a bad thing

If ladder safety feels like a repeat conversation, that’s because the same risks keep showing up. New employees are hired; facilities and equipment changes, and old habits stick around longer than they should. Even experienced workers fall into this trap. Familiar tasks start to invite rushing. Rushing leads to shortcuts, and shortcuts are where ladder injuries happen.

Emphasis must be placed on recognizing the risk before the climb starts. This means knowing when a ladder is the wrong choice, repositioning is safer than reaching, and when a quick task deserves the same setup as a longer one.

Most incidents don’t start with bad intentions. They start with “just this once” decisions, one more rung, one quick reach, one skipped check. Effective ladder safety training is about breaking routines and refocusing attention on the decisions that make ladder work safer.

Routine work, repeat injuries

Ladder injuries follow a familiar pattern. They don’t usually come from unusual jobs or unexpected hazards, and they happen during everyday tasks that feel common. Injury reports often look the same, such as short tasks, quick setups, and decisions made under time pressure. The ladder didn’t fail. The setup and the decisions around it did.

Injury data from OSHA and the Bureau of Labor Statistics (BLS) consistently point to the same causes. That’s why the same types of ladder injuries keep occurring repeatedly, not because the hazards are unknown, but because routine work makes those hazards easier to overlook. These reasons include:

• people underestimate the risk because ladders feel familiar;
• jobs feel “too small” to stop and reset the ladder;
• time pressure encourages leaning, rushing, and overreaching; and
• experience leads to comfort, and comfort leads to shortcuts.

The rules are written in injuries

OSHA ladder requirements are built around real injury trends and are based on decades of injury data. Falls from ladders remain one of the leading causes of workplace injuries, which is why OSHA keeps ladders near the top of its enforcement priorities year after year:

OSHA 29 CFR 1910.23 defines how ladders are intended to be used, specifically prohibiting practices such as standing on the top step of a stepladder, using ladders for purposes they were not designed for, and climbing ladders that have not been inspected. These requirements exist because improper use, poor setup, and skipped inspections consistently show up in ladder fall investigations.

OSHA 29 CFR 1910.30 reinforces that preventing ladder injuries depends on training employees to recognize hazards before they climb, understand proper ladder selection and positioning, and know when a ladder is not the right tool for the task. Together, these standards emphasize that ladder injuries are not random events, they are predictable outcomes of routine decisions made during everyday work.

Small choices make a big difference

Ladder safety isn’t only about compliance. Incidents develop from a series of small, moment to moment decisions made during routine work. These choices made daily either reduce risk or quietly add to it. Ladder injuries can be avoided by taking the time to make simple improvements including:

• inspecting and securing the ladder,
• climbing down and repositioning,
• selecting the proper ladder for the task, and
• stopping when the ladder no longer feels stable or safe.

Key to remember: Take the time to choose safer setups, stay alert, and prevent routine decisions from turning into preventable injuries. When employees choose the correct ladder, reposition instead of reaching, and inspect before use, the risk of ladder injuries falls, not your employees.