...
§600.301 Labeling requirements.
(a) Prior to being offered for sale, each manufacturer shall affix or cause to be affixed and each dealer shall maintain or cause to be maintained on each automobile:
(1) A general fuel economy label (initial, or updated as required in §600.314) as described in §600.302 or:
(2) A specific label, for those automobiles manufactured or imported before the date that occurs 15 days after general labels have been determined by the manufacturer, as described in §600.210-08(b) or §600.210-12(b).
(i) If the manufacturer elects to use a specific label within a model type (as defined in §600.002, he shall also affix specific labels on all automobiles within this model type, except on those automobiles manufactured or imported before the date that labels are required to bear range values as required by paragraph (b) of this section, or determined by the Administrator, or as permitted under §600.310.
(ii) If a manufacturer elects to change from general to specific labels or vice versa within a model type, the manufacturer shall, within five calendar days, initiate or discontinue as applicable, the use of specific labels on all vehicles within a model type at all facilities where labels are affixed.
(3) For any vehicle for which a specific label is requested which has a combined FTP/HFET-based fuel economy value, as determined in §600.513, at or below the minimum tax-free value, the following statement must appear on the specific label:
“[Manufacturer's name] may have to pay IRS a Gas Guzzler Tax on this vehicle because of the low fuel economy.”
(4)(i) At the time a general fuel economy value is determined for a model type, a manufacturer shall, except as provided in paragraph (a)(4)(ii) of this section, relabel, or cause to be relabeled, vehicles which:
(A) Have not been delivered to the ultimate purchaser, and
(B) Have a combined FTP/HFET-based model type fuel economy value (as determined in §600.208-08(b) or §600.208-12(b) of 0.1 mpg or more below the lowest fuel economy value at which a Gas Guzzler Tax of $0 is to be assessed.
(ii) The manufacturer has the option of re-labeling vehicles during the first five working days after the general label value is known.
(iii) For those vehicle model types which have been issued a specific label and are subsequently found to have tax liability, the manufacturer is responsible for the tax liability regardless of whether the vehicle has been sold or not or whether the vehicle has been relabeled or not.
(b) The manufacturer shall include the current range of fuel economy of comparable automobiles (as described in §§600.311 and 600.314) in the label of each vehicle manufactured or imported more than 15 calendar days after the current range is made available by the Administrator.
(1) Automobiles manufactured or imported before a date 16 or more calendar days after the initial label range is made available under §600.311 shall include the range from the previous model year.
(2) Automobiles manufactured or imported more than 15 calendar days after the label range is made available under §600.311 shall be labeled with the current range of fuel economy of comparable automobiles as approved for that label.
(c) The fuel economy label must be readily visible from the exterior of the automobile and remain affixed until the time the automobile is delivered to the ultimate consumer.
(1) It is preferable that the fuel economy label information be incorporated into the Automobile Information Disclosure Act label, provided that the prominence and legibility of the fuel economy label is maintained. For this purpose, all fuel economy label information must be placed on a separate section in the Automobile Information Disclosure Act label and may not be intermixed with that label information, except for vehicle descriptions as noted in §600.303-08(d)(1).
(2) The fuel economy label must be located on a side window. If the window is not large enough to contain both the Automobile Information Disclosure Act label and the fuel economy label, the manufacturer shall have the fuel economy label affixed on another window and as close as possible to the Automobile Information Disclosure Act label.
(3) The manufacturer shall have the fuel economy label affixed in such a manner that appearance and legibility are maintained until after the vehicle is delivered to the ultimate consumer.
(d) The labeling requirements specified in this subpart for 2008 model year vehicles continue to apply through the 2011 model year. In the 2012 model year, manufacturers may label their vehicles as specified in this subpart for either 2008 or 2012 model years. The labeling requirements specified in this subpart for 2012 model year vehicles are mandatory for 2013 and later model years.
[76 FR 39558, July 6, 2011]
§600.302-12 Fuel economy label - general provisions.
This section describes labeling requirements and specifications that apply to all vehicles. The requirements and specifications in this section and those in §§600.304 through 600.310 are illustrated in Appendix VI of this part.
(a) Basic format. Fuel economy labels must be rectangular in shape with a minimum width of 174 mm and a minimum height of 114 mm. The required label can be divided into three fields separated and outlined by a continuous border, as described in paragraphs (b) through (e) of this section.
(b) Border. Create a continuous black border to outline the label and separate the three information fields. Include the following information in the top and bottom portions of the border:
(1) In the left portion of the upper border, include “EPA” and “DOT” with a horizontal line in between (“EPA divided by DOT”).
(2) Immediately to the right of the Agency names, include the heading “Fuel Economy and Environment”.
(3) Identify the vehicle's fuel type on the right-most portion of the upper border in a blue-colored field as follows:
(i) For vehicles designed to operate on a single fuel, identify the appropriate fuel. For example, identify the vehicle as “Gasoline Vehicle”, “Diesel Vehicle”, “Compressed Natural Gas Vehicle”, “Hydrogen Fuel Cell Vehicle”, etc. This includes hybrid electric vehicles that do not have plug-in capability. Include a logo corresponding to the fuel to the left of this designation as follows:
(A) For gasoline, include a fuel pump logo.
(B) For diesel fuel, include a fuel pump logo with a “D” inscribed in the base of the fuel pump.
(C) For natural gas, include the established CNG logo.
(D) For hydrogen fuel cells, include the expression “H2”.
(ii) Identify flexible-fuel vehicles and dual-fuel vehicles as “Flexible-Fuel Vehicle Gasoline-Ethanol (E85)”, “Flexible-Fuel Vehicle Diesel-Natural Gas”, etc. Include a fuel pump logo or a combination of logos to the left of this designation as appropriate. For example, for vehicles that operate on gasoline or ethanol, include a fuel pump logo and the designation “E85”.
(iii) Identify plug-in hybrid electric vehicles as “Plug-In Hybrid Vehicle Electricity-Gasoline” or “Plug-In Hybrid Vehicle Electricity-Diesel”. Include a fuel pump logo as specified in paragraph (b)(3)(i) of this section and an electric plug logo to the left of this designation.
(iv) Identify electric vehicles as “Electric Vehicle”. Include an electric plug logo to the left of this designation.
(4) Include the following statement in the upper left portion of the lower border: “Actual results will vary for many reasons, including driving conditions and how you drive and maintain your vehicle. The average new vehicle gets a MPG and costs $b to fuel over 5 years. Cost estimates are based on c miles per year at $d per gallon. MPGe is miles per gasoline gallon equivalent. Vehicle emissions are a significant cause of climate change and smog.” For a, b, c, and d, insert the appropriate values established by EPA, including consideration of the type of fuel that is required for the vehicle. See §§600.303 through 600.310 for alternate statements that apply for vehicles that use a fuel other than gasoline or diesel fuel.
(5) In the lower left portion of the lower border, include the Web site reference, “fueleconomy.gov”, and the following statement: “Calculate personalized estimates and compare vehicles”.
(6) Include a field in the right-most portion of the lower border to allow for accessing interactive information with mobile electronic devices. To do this, include an image of a QR code that will direct mobile electronic devices to an EPA-specified Web site with fuel economy information. Generate the QR code as specified in ISO/IEC 18004 (incorporated by reference in §600.011). To the left of the QR code, include the vertically oriented caption “Smartphone QR Code TM”.
(7) Along the lower edge of the lower border, to the left of the field with the QR Code, include the logos for EPA, the Department of Transportation, and the Department of Energy.
(c) Fuel economy and cost values. Include the following elements in the field at the top of the label:
(1) The elements specified in this paragraph (c)(1) for vehicles that run on gasoline or diesel fuel with no plug-in capability. See §§600.304 through 600.310 for specifications that apply for other vehicles.
(i) The heading “Fuel Economy” near the top left corner of the field.
(ii) The combined fuel economy value as determined in §600.311 below the heading. Include the expression “combined city/hwy” below this number.
(iii) The fuel pump logo to the left of the combined fuel economy value. For diesel fuel, include a fuel pump logo with a “D” inscribed in the base of the fuel pump.
(iv) The units identifier and specific fuel economy values to the right of the combined fuel economy rating as follows:
(A) Include the term “MPG” in the upper portion of the designated space.
(B) Include the city fuel economy value determined in §600.311 in the lower left portion of the designated space. Include the expression “city” below this number.
(C) Include the highway fuel economy value determined in §600.311 in the lower right portion of the designated space. Include the expression “highway” below this number.
(v) The fuel consumption rate determined in §600.311, below the combined fuel economy value, followed by the expression “gallons per 100 miles”.
(2) In the upper middle portion of the field, include the following statement: “___ range from x to y MPG. The best vehicle rates z MPGe.” Fill in the blank with the appropriate vehicle class (such as Small SUVs). For x, y, and z, insert the appropriate values established by EPA.
(3) Include one of the following statements in the right side of the field:
(i) For vehicles with calculated fuel costs higher than the average vehicle as specified in §600.311: “You spend $x more in fuel costs over 5 years compared to the average new vehicle.” Complete the statement by including the calculated increase in fuel costs as specified in §600.311.
(ii) For all other vehicles: “You save $x in fuel costs over 5 years compared to the average new vehicle.” Complete the statement by including the calculated fuel savings as specified in §600.311. Note that this includes fuel savings of $0.
(d) Annual fuel cost. Include the following statement in the field in the lower left portion of the label: “Annual fuel cost $x”. Complete this statement using the value for annual fuel cost determined in §600.311.
(e) Performance ratings. Include the following information in the field in the lower left portion of the label:
(1) The heading, “Fuel Economy and Greenhouse Gas Rating (tailpipe only)” in the top left corner of the field.
(2) A slider bar below the heading in the left portion of the field to characterize the vehicle's fuel economy and greenhouse gas ratings, as determined in §600.311. Position a box with a downward-pointing wedge above the slider bar positioned to show where that vehicle's fuel economy rating falls relative to the total range; include the vehicle's fuel economy rating inside the box. If the greenhouse gas rating from §600.311 is different than the fuel economy rating, position a second box with an upward-pointing wedge below the slider bar positioned to show where that vehicle's greenhouse gas rating falls relative to the total range; include the vehicle's greenhouse gas rating inside the box. Include the expression “CO2” to the left of the box with the greenhouse gas rating and add the expression MPG to the left of the box with the fuel economy rating. Include the number 1 inside the border at the left end of the slider bar. Include the number 10 inside the border at the right end of the slider bar and add the term “Best” below the slider bar, directly under the number. EPA will periodically calculate and publish updated rating values as described in §600.311. Add color to the slider bar such that it is blue at the left end of the range, white at the right end of the range, and shaded continuously across the range.
(3) The heading, “Smog Rating (tailpipe only)” in the top right corner of the field.
(4) Insert a slider bar in the right portion of the field to characterize the vehicle's level of emission control for ozone-related air pollutants relative to that of all vehicles. Position a box with a downward-pointing wedge above the slider bar positioned to show where that vehicle's emission rating falls relative to the total range. Include the vehicle's emission rating (as described in §600.311) inside the box. Include the number 1 in the border at the left end of the slider bar; include the number 10 in the border at the right end of the slider bar and add the term “Best” below the slider bar, directly under the number. EPA will periodically calculate and publish updated range values as described in §600.311. Add color to the slider bar such that it is blue at the left end of the range, white at the right end of the range, and shaded continuously across the range.
(5) The following statements below the slider bars: “This vehicle emits x grams CO2 per mile. The best emits 0 grams per mile (tailpipe only). Producing and distributing fuel also create emissions; learn more at fueleconomy.gov.” For x, insert the vehicle's composite CO2 emission rate as described in §600.311. See §§600.308 and 600.310 for specifications that apply for vehicles powered by electricity.
(f) Vehicle description. Where the fuel economy label is physically incorporated with the Motor Vehicle Information and Cost Savings Act label, no further vehicle description is needed. If the fuel economy label is separate from the Automobile Information Disclosure Act label, describe the vehicle in a location on the label that does not interfere with the other required information. In cases where the vehicle description may not easily fit on the label, the manufacturer may request Administrator approval of modifications to the label format to accommodate this information. Include the following items in the vehicle description, if applicable:
(1) Model year.
(2) Vehicle car line.
(3) Engine displacement, in cubic inches, cubic centimeters, or liters whichever is consistent with the customary description of that engine.
(4) Transmission class.
(5) Other descriptive information, as necessary, such as number of engine cylinders, to distinguish otherwise identical model types or, in the case of specific labels, vehicle configurations, as approved by the Administrator.
(g) [Reserved]
(h) Gas guzzler provisions. For vehicles requiring a tax statement under §600.513, add the phrase “$x gas guzzler tax”, where $x is the value of the tax. The tax value required by this paragraph (h) is based on the combined fuel economy value for the model type calculated according to §600.513 and rounded to the nearest 0.1 mpg.
(i) Alternative label provisions for special cases. The Administrator may approve modifications to the style guidelines if space is limited. The Administrator may also prescribe special label format and information requirements for vehicles that are not specifically described in this subpart, such as hydrogen-fueled internal combustion engines or hybrid electric vehicles that have engines operating on fuels other than gasoline or diesel fuel. The Administrator may also approve alternate wording of statements on the label if that is necessary or appropriate for a given fuel or combination of fuels. The revised labeling specifications will conform to the principles established in this subpart, with any appropriate modifications or additions to reflect the vehicle's unique characteristics. See 49 U.S.C. 32908(b)(1)(F).
(j) Rounding. Unless the regulation specifies otherwise, do not round intermediate values, but round final calculated values identified in this subpart to the nearest whole number.
(k) Updating information. EPA will periodically publish updated information that is needed to comply with the labeling requirements in this subpart. This includes the annual mileage rates and fuel-cost information, the “best and worst” values needed for calculating relative ratings for individual vehicles, and the various rating criteria as specified in §600.311.
[76 FR 39559, July 6, 2011, as amended at 76 FR 57380, Sept. 15, 2011]
§600.303-12 Fuel economy label - special requirements for flexible-fuel vehicles.
Fuel economy labels for flexible-fuel vehicles must meet the specifications described in §600.302, with the modifications described in this section. This section describes how to label flexible-fuel vehicles equipped with gasoline engines. If the vehicle has a diesel engine, all the references to “gas” or “gasoline” in this section are understood to refer to “diesel” or “diesel fuel”, respectively. All values described in this section are based on gasoline operation, unless otherwise specifically noted.
(a) For qualifying vehicles, include the following additional sentence in the statement identified in §600.302-12(b)(4): “This is a dual fueled automobile.” See the definition of “dual fueled automobile” in §600.002.
(b) Include the following elements instead of the information identified in §600.302-12(c)(1):
(1) The heading “Fuel Economy” near the top left corner of the field.
(2) The combined fuel economy value as determined in §600.311 below the heading. Include the expression “combined city/hwy” below this number.
(3) The fuel pump logo and other logos as specified in §600.302-12(b)(3)(ii) to the left of the combined fuel economy value.
(4) The units identifier and specific fuel economy values to the right of the combined fuel economy value as follows:
(i) Include the term “MPG” in the upper portion of the designated space.
(ii) Include the city fuel economy value determined in §600.311 in the lower left portion of the designated space. Include the expression “city” below this number.
(iii) Include the highway fuel economy value determined in §600.311 in the lower right portion of the designated space. Include the expression “highway” below this number.
(5) The fuel consumption rate determined in §600.311, to the right of the fuel economy information. Include the expression “gallons per 100 miles” below the numerical value.
(6) Add the following statement after the statements described in §600.302-12(c)(2): “Values are based on gasoline and do not reflect performance and ratings based on E85.” Adjust this statement as appropriate for vehicles designed to operate on different fuels.
(c) You may include the sub-heading “Driving Range” below the combined fuel economy value, with range bars below this sub-heading as follows:
(1) Insert a horizontal range bar nominally 80 mm long to show how far the vehicle can drive from a full tank of gasoline. Include a vehicle logo at the right end of the range bar. Include the following left-justified expression inside the range bar: “Gasoline: x miles”. Complete the expression by identifying the appropriate value for total driving range from §600.311.
(2) Insert a second horizontal range bar as described in paragraph (c)(1) of this section that shows how far the vehicle can drive from a full tank with the second fuel. Establish the length of the line based on the proportion of driving ranges for the different fuels. Identify the appropriate fuel in the range bar.
[76 FR 39561, July 6, 2011, as amended at 77 FR 63183, Oct. 15, 2012]
§600.304-12 Fuel economy label - special requirements for hydrogen fuel cell vehicles.
Fuel economy labels for hydrogen fuel cell vehicles must meet the specifications described in §600.302, with the following modifications:
(a) Include the following statement instead of the statement specified in §600.302-12(b)(4): “Actual results will vary for many reasons, including driving conditions and how you drive and maintain your vehicle. The average new vehicle gets a MPG and costs $b to fuel over 5 years. Cost estimates are based on c miles per year at $d per kilogram of hydrogen. Vehicle emissions are a significant cause of global warming and smog.” For a, b, c, and d, insert the appropriate values established by EPA.
(b) Include the following elements instead of the information identified in §600.302-12(c)(1):
(1) The heading “Fuel Economy” near the top left corner of the field.
(2) The combined fuel economy value as determined in §600.311 below the heading. Include the expression “combined city/hwy” below this number.
(3) The logo specified in §600.302-12(b)(3)(ii) to the left of the combined fuel economy value.
(4) The units identifier and specific fuel economy values to the right of the combined fuel economy value as follows:
(i) Include the term “MPGe” in the upper portion of the designated space.
(ii) Include the city fuel economy value determined in §600.311 in the lower left portion of the designated space. Include the expression “city” below this number.
(iii) Include the highway fuel economy value determined in §600.311 in the lower right portion of the designated space. Include the expression “highway” below this number.
(5) The fuel consumption rate determined in §600.311, to the right of the fuel economy information. Include the expression “kg H2 per 100 miles” below the numerical value.
(6) The sub-heading “Driving Range” below the combined fuel economy value. Below this sub-heading, insert a horizontal range bar nominally 80 mm long to show how far the vehicle can drive when fully fueled. Include a vehicle logo at the right end of the range bar. Include the following left-justified expression inside the range bar: “When fully fueled, vehicle can travel about * * *”. Below the right end of the range bar, include the expression “x miles”; complete the expression by identifying the appropriate value for total driving range from §600.311. Include numbers below the bar showing the scale, with numbers starting at 0 and increasing in equal increments. Use good engineering judgment to divide the range bar into four, five, or six increments.
[76 FR 39561, July 6, 2011]
§600.306-12 Fuel economy label - special requirements for compressed natural gas vehicles.
Fuel economy labels for dedicated natural gas vehicles must meet the specifications described in §600.302, with the following modifications:
(a) Include the following statement instead of the statement specified in §600.302-12(b)(4): “Actual results will vary for many reasons, including driving conditions and how you drive and maintain your vehicle. The average new vehicle gets a MPG and costs $b to fuel over 5 years. Cost estimates are based on c miles per year at $d per gasoline gallon equivalent. Vehicle emissions are a significant cause of global warming and smog.” For a, b, c, and d, insert the appropriate values established by EPA.
(b) Include the following elements instead of the information identified in §600.302-12(c)(1):
(1) The heading “Fuel Economy” near the top left corner of the field.
(2) The combined fuel economy value as determined in below the heading. Include the expression “combined city/hwy” below this number.
(3) The logo specified in §600.302-12(b)(3)(ii) to the left of the combined fuel economy value.
(4) The units identifier and specific fuel economy ratings to the right of the combined fuel economy value as follows:
(i) Include the term “MPGe” in the upper portion of the designated space.
(ii) Include the city fuel economy value determined in §600.311 in the lower left portion of the designated space. Include the expression “city” below this number.
(iii) Include the highway fuel economy value determined in §600.311 in the lower right portion of the designated space. Include the expression “highway” below this number.
(5) The fuel consumption rate determined in §600.311, to the right of the fuel economy information. Include the expression “equivalent gallons per 100 miles” below the numerical value.
(6) The sub-heading “Driving Range” below the combined fuel economy value. Below this sub-heading, insert a horizontal range bar nominally 80 mm long to show how far the vehicle can drive when fully fueled. Include a vehicle logo at the right end of the range bar. Include the following left-justified expression inside the range bar: “When fully fueled, vehicle can travel about * * *””. Below the right end of the range bar, include the expression “x miles”; complete the expression by identifying the appropriate value for total driving range from §600.311. Include numbers below the bar showing the scale, with numbers starting at 0 and increasing in equal increments. Use good engineering judgment to divide the range bar into four, five, or six increments.
[76 FR 39562, July 6, 2011]
§600.308-12 Fuel economy label format requirements - plug-in hybrid electric vehicles.
Fuel economy labels for plug-in hybrid electric vehicles must meet the specifications described in §600.302, with the exceptions and additional specifications described in this section. This section describes how to label vehicles equipped with gasoline engines. If the vehicle has a diesel engine, all the references to “gas” or “gasoline” in this section are understood to refer to “diesel” or “diesel fuel”, respectively.
(a) Include the following statement instead of the statement specified in §600.302-12(b)(4): “Actual results will vary for many reasons, including driving conditions and how you drive and maintain your vehicle. The average new vehicle gets a MPG and costs $b to fuel over 5 years. Cost estimates are based on c miles per year at $d per gallon and $e per kW-hr. Vehicle emissions are a significant cause of global warming and smog.” For a, b, c, d, and e, insert the appropriate values established by EPA. For qualifying vehicles, include the following additional sentence: “This is a dual fueled automobile.” See the definition of “dual fueled automobile in §600.002.
(b) Include the following elements instead of the information identified in §600.302-12(c)(1):
(1) The heading “Fuel Economy” near the top left corner of the field. Include the statement specified in §600.312-12(c)(2) to the right of the heading.
(2) An outlined box below the heading with the following information:
(i) The sub-heading “Electricity” if the vehicle's engine starts only after the battery is fully discharged, or “Electricity + Gasoline” if the vehicle uses combined power from the battery and the engine before the battery is fully discharged.
(ii) The expression “Charge Time: x hours (240V)” below the sub-heading, where x is the time to charge the battery as specified in §600.311. Change the specified voltage if appropriate as specified in §600.311.
(iii) The combined fuel economy value for the charge-depleting mode of operation as determined in §600.311 below the charge time. Include the expression “combined city/highway” below this number.
(iv) An electric plug logo to the left of the combined fuel economy value. For vehicles that use combined power from the battery and the engine before the battery is fully discharged, also include the fuel pump logo.
(v) The units identifier and consumption ratings to the right of the combined fuel economy value as follows:
(A) Include the term “MPGe” in the upper portion of the designated space.
(B) If the vehicle's engine starts only after the battery is fully discharged, identify the vehicle's electricity consumption rate as specified in §600.311. Below the number, include the expression: “kW-hrs per 100 miles”.
(C) If the vehicle uses combined power from the battery and the engine before the battery is fully discharged, identify the vehicle's gasoline consumption rate as specified in §600.311; to the right of this number, include the expression: “gallons per 100 miles”. Below the gasoline consumption rate, identify the vehicle's electricity consumption rate as specified in §600.311; to the right of this number, include the expression: “kW-hrs per 100 miles”.
(3) A second outlined box to the right of the box described in paragraph (b)(2) of this section with the following information:
(i) The sub-heading “Gasoline Only”.
(ii) The combined fuel economy value for operation after the battery is fully discharged as determined in §600.311 below the sub-heading. Include the expression “combined city/highway” below this number.
(iii) A fuel pump logo to the left of the combined fuel economy value.
(iv) The units identifier and consumption rating to the right of the combined fuel economy value as follows:
(A) Include the term “MPG” in the upper portion of the designated space.
(B) Identify the vehicle's gasoline consumption rate as specified in §600.311.
Below this number, include the expression: “gallons per 100 miles”.
(4) Insert a horizontal range bar below the boxes specified in paragraphs (b)(2) and
(3) of this section that shows how far the vehicle can drive before the battery is fully discharged, and also how far the vehicle can drive before running out of fuel, as described in §600.311. Scale the range bar such that the driving range at the point of fully discharging the battery is directly between the two boxes. Identify the driving range up to fully discharging the battery underneath that point on the range bar (e.g., “50 miles”). Use solid black for the gasoline-only portion of the range bar. Include the left-justified expression “Gasoline only” in the gasoline-only portion of the range bar. Similarly, in the electric portion of the range bar, include the left-justified expression “All electric range” if the vehicle's engine starts only after the battery is fully discharged, or “Electricity + Gasoline” if the vehicle uses combined power from the battery and the engine before the battery is fully discharged. Include a vehicle logo at the right end of the range bar. Extend an arrow from the battery portion of the range bar up to the right side of the box described in paragraph (b)(2) of this section. Similarly, extend an arrow from the gasoline-only portion of the range bar up to the left side of the box described in paragraph (b)(3) of this section. Include numbers below the bar showing the scale, with at least three evenly spaced increments to cover operation before the battery is fully discharged. Include one more increment using that same scale into the gasoline-only portion of the range bar. Indicate a broken line toward the right end of the range bar, followed by the vehicle's total driving distance before running out of fuel, as described in§600.311. Adjust the scale and length of the range bar if the specifications in this paragraph (a)(5) do not work for your vehicle. Include a left-justified heading above the range bar with the expression: “Driving Range”. For vehicles that use combined power from the battery and the engine before the battery is fully discharged, add the following statement below the range bar described in this paragraph (b)(4): “All electric range = x miles”; complete the expression by identifying the appropriate value for driving range starting from a full battery before the engine starts as described in §600.311.
(c) Include the following statement instead of the one identified in §600.302-12(c)(5): “This vehicle emits x grams CO2 per mile. The best emits 0 grams per mile (tailpipe only). Producing and distributing fuel and electricity also create emissions; learn more at fueleconomy.gov.” For x, insert the vehicle's composite CO2 emission rate as described in §600.311.
[76 FR 39562, July 6, 2011]
§600.310-12 Fuel economy label format requirements - electric vehicles.
Fuel economy labels for electric vehicles must meet the specifications described in §600.302, with the following modifications:
(a) Include the following statement instead of the statement specified in §600.302-12(b)(4): “Actual results will vary for many reasons, including driving conditions and how you drive and maintain your vehicle. The average new vehicle gets a MPG and costs $ b to fuel over 5 years. Cost estimates are based on c miles per year at $ d per kW-hr. MPGe is miles per gasoline gallon equivalent. Vehicle emissions are a significant cause of climate change and smog.” For a, b, c, and d, insert the appropriate values established by EPA.
(b) Include the following elements instead of the information identified in §600.302-12(c)(1):
(1) The heading “Fuel Economy” near the top left corner of the field.
(2) The combined fuel economy value as determined in §600.311 below the heading. Include the expression “combined city/hwy” below this number.
(3) An electric plug logo to the left of the combined fuel economy value.
(4) The units identifier and specific fuel economy values to the right of the combined fuel economy value as follows:
(i) Include the term “MPGe” in the upper portion of the designated space.
(ii) Include the city fuel economy value determined in §600.311 in the lower left portion of the designated space. Include the expression “city” below this number.
(iii) Include the highway fuel economy value determined in §600.311 in the lower right portion of the designated space. Include the expression “highway” below this number.
(5) The fuel consumption rate determined in §600.311, to the right of the fuel economy information. Include the expression “kW-hrs per 100 miles” below the numerical value.
(6) The sub-heading “Driving Range” below the combined fuel economy value. Below this sub-heading, insert a horizontal range bar nominally 80 mm long to show how far the vehicle can drive when fully fueled. Include a vehicle logo at the right end of the range bar. Include the following left-justified expression inside the range bar: “When fully charged, vehicle can travel about * * *”. Below the right end of the range bar, include the expression “x miles”; complete the expression by identifying the appropriate value for total driving range from §600.311. Include numbers below the bar showing the scale, with numbers starting at 0 and increasing in equal increments. Use good engineering judgment to divide the range bar into four, five, or six increments.
(7) Below the driving range information, the expression “Charge Time: x hours (240V)”, where x is the time to charge the battery as specified in §600.311. Change the specified voltage if appropriate as specified in §600.311.
(c) Include the following statement instead of the one identified in §600.302-12(c)(5): “This vehicle emits x grams CO2 per mile. The best emits 0 grams per mile (tailpipe only). Does not include emissions from generating electricity; learn more at fueleconomy.gov.” For x, insert the vehicle's composite CO2 emission rate as described in §600.311.
[76 FR 39563, July 6, 2011, as amended at 77 FR 63184, Oct. 15, 2012]
§600.311-12 Determination of values for fuel economy labels.
(a) Fuel economy. Determine city and highway fuel economy values as described in §600.210-12(a) and (b). Determine combined fuel economy values as described in §600.210-12(c). Note that the label for plug-in hybrid electric vehicles requires separate values for combined fuel economy for vehicle operation before and after the vehicle's battery is fully discharged; we generally refer to these modes as “Blended Electric + Gas” (or “Electric Only”, as applicable) and “Gas only”.
(b) CO2emission rate. Determine the engine-related CO2 emission rate as described in §600.210-12(d).
(c) Fuel consumption rate. Calculate the fuel consumption rate as follows:
(1) For vehicles with engines that are not plug-in hybrid electric vehicles, calculate the fuel consumption rate in gallons per 100 miles (or gasoline gallon equivalent per 100 miles for fuels other than gasoline or diesel fuel) with the following formula, rounded to the first decimal place:
Fuel Consumption Rate = 100/MPG
Where:
MPG = The value for combined fuel economy from §600.210-12(c), rounded to the nearest whole mpg.
(2) For plug-in hybrid electric vehicles, calculate two separate fuel consumption rates as follows:
(i) Calculate the fuel consumption rate based on engine operation after the battery is fully discharged as described in paragraph (c)(1) of this section.
(ii) Calculate the fuel consumption rate during operation before the battery is fully discharged in kW-hours per 100 miles as described in SAE J1711 (incorporated by reference in §600.011), as described in §600.116.
(3) For electric vehicles, calculate the fuel consumption rate in kW-hours per 100 miles with the following formula, rounded to the nearest whole number:
Fuel Consumption Rate = 100/MPG
Where:
MPG = The combined fuel economy value from paragraph (a) of this section, in miles per kW-hour.
(4) For hydrogen fuel cell vehicles, calculate the fuel consumption rate in kilograms of hydrogen per 100 miles with the following formula, rounded to the nearest whole number:
Fuel Consumption Rate = 100/MPG
Where:
MPG = The combined fuel economy value from paragraph (a) of this section, in miles per kilogram of hydrogen.
(d) Fuel economy and greenhouse gas ratings. Determine a vehicle's fuel economy and greenhouse gas ratings as follows:
(1) For gasoline-fueled vehicles that are not plug-in hybrid electric vehicles (including flexible fuel vehicles that operate on gasoline), establish a single rating based only on the vehicle's combined fuel economy from paragraph (a) of this section. For all other vehicles, establish a fuel economy rating based on the vehicle's combined fuel economy and establish a separate greenhouse gas rating based on combined CO2 emission rates from paragraph (b) of this section.
(2) We will establish the fuel economy rating based on fuel consumption values specified in paragraph (c) of this section. We will establish the value dividing the 5 and 6 ratings based on the fuel consumption corresponding to the projected achieved Corporate Average Fuel Economy level for the applicable model year. This is intended to prevent below-average vehicles from getting an above-average fuel economy rating for the label. We will establish the remaining cutpoints based on a statistical evaluation of available information from the certification database for all model types. Specifically, the mean value plus two standard deviations will define the point between the 1 and 2 ratings. The mean value minus two standard deviations will define the point between the 9 and 10 ratings. The 1 rating will apply for any vehicle with higher fuel consumption rates than the 2 rating; similarly, the 10 rating will apply for any vehicle with lower fuel consumption rates than the 9 rating. We will calculate range values for the remaining intermediate ratings by dividing the range into equal intervals. We will convert the resulting range intervals to equivalent miles-per-gallon values. We will define the greenhouse gas ratings by converting the values from the fuel economy rating intervals to equivalent CO2 emission rates using the conventional conversion factor for gasoline (8887 g CO2 per gallon of consumed fuel).
(e) Annual fuel cost. Calculate annual fuel costs as follows:
(1) Except as specified in paragraph (e)(3) of this section, calculate the total annual fuel cost with the following formula, rounded to nearest $50:
Annual Fuel Cost = Fuel Price/MPG × Average Annual Miles
Where:
Fuel Price = The estimated fuel price provided by EPA for the type of fuel required for the vehicle. The units are dollars per gallon for gasoline and diesel fuel, dollars per gasoline gallon equivalent for natural gas, dollars per kW-hr for plug-in electricity, and dollars per kilogram of hydrogen for hydrogen fuel cell vehicles.
MPG = The combined fuel economy value from paragraph (a) of this section. The units are miles per gallon for gasoline and diesel fuel, miles per gasoline gallon equivalent for natural gas, miles per kW-hr for plug-in electricity, and miles per kilogram of hydrogen for hydrogen fuel cell vehicles.
Average Annual Miles = The estimated annual mileage figure provided by EPA, in miles.
(2) For dual fuel vehicles and flexible fuel vehicles, disregard operation on the alternative fuel.
(3) For plug-in hybrid electric vehicles, calculate annual fuel cost as described in this paragraph (e)(3). This description applies for vehicles whose engine starts only after the battery is fully discharged. Use good engineering judgment to extrapolate this for calculating annual fuel cost for vehicles that use combined power from the battery and the engine before the battery is fully discharged. Calculate annual fuel cost as follows:
(i) Determine the charge-depleting ranges for city and highway operation as described in paragraph (j)(4)(i) of this section. Adjust each of these values for 5-cycle operation.
(ii) Calculate multi-day individual utility factors (UF) as described in §600.116 corresponding to the driving ranges from paragraph (e)(3)(i) of this section.
(iii) Calculate values for the vehicle's average fuel economy over the charge-depleting range (in miles per kW-hr) for city and highway operation as described in §600.210. Adjust each of these values for 5-cycle operation. Convert these to $/mile values by dividing the appropriate fuel price from paragraph (e)(1) of this section by the average fuel economy determined in this paragraph (e)(3)(iii).
(iv) Calculate values for the vehicle's average fuel economy over the charge-sustaining range (in miles per gallon) for city and highway operation as described in §600.210-12. Adjust each of these values for 5-cycle operation. Convert these to $/mile values by dividing the appropriate fuel price from paragraph (e)(1) of this section by the average fuel economy determined in this paragraph (e)(3)(iv).
(v) Calculate a composite $/mile value for city driving using the following equation:
$/mile = $/mileCD × UF + $/mileCS × (1-UF)
(vi) Repeat the calculation in paragraph (e)(3)(v) of this section for highway driving.
(vii) Calculate the annual fuel cost based on the combined values for city and highway driving using the following equation:
Annual fuel cost = ($/milecity × 0.55 + $/milehwy × 0.45) × Average Annual Miles
(4) Round the annual fuel cost to the nearest $50 by dividing the unrounded annual fuel cost by 50, then rounding the result to the nearest whole number, then multiplying this rounded result by 50 to determine the annual fuel cost to be used for purposes of labeling.
(f) Fuel savings. Calculate an estimated five-year cost increment relative to an average vehicle by multiplying the annual fuel cost from paragraph (e) of this section by 5 and subtracting this value from the average five-year fuel cost. We will calculate the average five-year fuel cost from the annual fuel cost equation in paragraph (e) of this section based on a gasoline-fueled vehicle with a mean fuel economy value, consistent with the value dividing the 5 and 6 ratings under paragraph (d) of this section. The average five-year fuel cost for model year 2012 is $12,600 for a 22-mpg vehicle that drives 15,000 miles per year with gasoline priced at $3.70 per gallon. We may periodically update this five year reference fuel cost for later model years to better characterize the fuel economy for an average vehicle. Round the calculated five-year cost increment to the nearest $50. Negative values represent a cost increase compared to the average vehicle.
(g) Smog rating. Establish a rating for exhaust emissions other than CO 2 based on the applicable emission standards for the appropriate model year as shown in tables 1 through 3 to this paragraph (g). Unless specified otherwise, use the California emission standards to select the smog rating only for vehicles not certified to any EPA standards. For Independent Commercial Importers that import vehicles not subject to the identified emission standards, the vehicle's smog rating is 1. Similarly, if a manufacturer certifies vehicles to emission standards that are less stringent than all the identified standards for any reason, the vehicle's smog rating is 1. If EPA or California emission standards change in the future, we may revise the emission levels corresponding to each rating for future model years as appropriate to reflect the changed standards. If this occurs, we would publish the revised ratings as described in §600.302-12(k), allowing sufficient lead time to make the changes; we would also expect to initiate a rulemaking to update the smog rating in the regulation.
| Rating | U.S. EPA emission standard | California Air Resources Board emission standard |
|---|---|---|
| 1 | ULEV 125. | |
| 2 | Bin 65 or Bin 70 | ULEV70. |
| 3 | Bin 55 or Bin 60 | ULEV60. |
| 4 | Bin 45 or Bin 50 | ULEV50. |
| 5 | Bin 35 or Bin 40 | ULEV40. |
| 6 | Bin 25 or Bin 30 | SULEV25 or SULEV30. |
| 7 | Bin 15 or Bin 20 | SULEV15 or SULEV20. |
| 8 | Bin 10 | |
| 9 | Bin 5 | |
| 10 | Bin 0 | ZEV. |
| Rating | U.S. EPA Tier 3 or Tier 4 emission standard | California Air Resources Board LEV III or LEV IV emission standard |
|---|---|---|
| 1 | Bin 160 | LEV 160. |
| 2 | Bin 125 | ULEV125. |
| 4 | Bin 55 through Bin 70 | ULEV70 or ULEV60. |
| 5 | Bin 35 through Bin 50 | ULEV50 or ULEV40. |
| 6 | Bin 25 or Bin 30 | SULEV 25 or SULEV30. |
| 7 | Bin 15 or Bin 20 | SULEV 15 or SULEV20. |
| 8 | Bin 10 | |
| 9 | Bin 5 | |
| 10 | Bin 0 | ZEV. |
| Rating | U.S. EPA Tier 3 emission standard | U.S EPA Tier 2 emission standard | California Air Resources Board LEV III emission standard |
|---|---|---|---|
| 1 | Bin 160 | Bin 5 through Bin 8 | LEV 160. |
| 3 | Bin 125, Bin 110 | Bin 4 | ULEV125. |
| 5 | Bin 85, Bin 70 | Bin 3 | ULEV70. |
| 6 | Bin 50 | ULEV50. | |
| 7 | Bin 30 | Bin 2 | SULEV30. |
| 8 | Bin 20 | SULEV20. | |
| 10 | Bin 0 | Bin 1 | ZEV. |
(h) Ranges of fuel economy and CO2emission values. We will determine the range of combined fuel economy and CO2 emission values for each vehicle class identified in §600.315. We will generally update these range values before the start of each model year based on the lowest and highest values within each vehicle class. We will also use this same information to establish a range of fuel economy values for all vehicles. Continue to use the most recently published numbers until we update them, even if you start a new model year before we publish the range values for the new model year.
(i) [Reserved]
(j) Driving range. Determine the driving range for certain vehicles as follows:
(1) For vehicles operating on nonpressurized liquid fuels, determine the vehicle's driving range in miles by multiplying the combined fuel economy described in paragraph (a) of this section by the vehicle's usable fuel storage capacity, rounded to the nearest whole number.
(2) For electric vehicles, determine the vehicle's overall driving range as described in Section 8 of SAE J1634 (incorporated by reference in §600.011), with amendments and revisions as described in §600.116. Determine separate range values for FTP-based city and HFET-based highway driving. Adjust these values to represent 5-cycle values as described in §600.210-12(d)(3), then combine them arithmetically by averaging the two values, weighted 0.55 and 0.45, respectively, and rounding to the nearest whole number.
(3) For natural gas vehicles, determine the vehicle's driving range in miles by multiplying the combined fuel economy described in paragraph (a) of this section by the vehicle's usable fuel storage capacity (expressed in gasoline gallon equivalents), rounded to the nearest whole number.
(4) For plug-in hybrid electric vehicles, determine the adjusted charge-depleting (Rcda) driving range, the adjusted all electric driving range (if applicable), and overall adjusted driving range as described in SAE J1711 (incorporated by reference in §600.011), as described in §600.116, as follows:
(i) Determine the vehicle's Actual Charge-Depleting Range, R cda , separately for FTP-based city and HFET-based highway driving. Adjust these values to represent 5-cycle values as described in 600.115-11, then combine them arithmetically by averaging the two values, weighted 0.55 and 0.45, respectively, and rounding to the nearest whole number. Precondition the vehicle as needed to minimize engine operation for consuming stored fuel vapors in evaporative canisters; for example, you may purge the evaporative canister or time a refueling event to avoid engine starting related to purging the canister. For vehicles that use combined power from the battery and the engine before the battery is fully discharged, also use this procedure to establish an all electric range by determining the distance the vehicle drives before the engine starts, rounded to the nearest mile. You may represent this as a range of values. We may approve adjustments to these procedures if they are necessary to properly characterize a vehicle's all electric range.
(ii) Use good engineering judgment to calculate the vehicle's operating distance before the fuel tank is empty when starting with a full fuel tank and a fully charged battery, consistent with the procedure and calculation specified in this paragraph (j), rounded to the nearest 10 miles.
(5) For hydrogen fuel cell vehicles, determine the vehicle's driving range in miles by multiplying the combined fuel economy described in paragraph (a) of this section by the vehicle's usable fuel storage capacity (expressed in kilograms of hydrogen), rounded to the nearest whole number.
(k) Charge time. For electric vehicles, determine the time it takes to fully charge the battery from a 240 volt power source to the point that the battery meets the manufacturer's end-of-charge criteria, consistent with the procedures specified in SAE J1634 (incorporated by reference in §600.011) for electric vehicles and in SAE J1711 (incorporated by reference in §600.011) for plug-in hybrid electric vehicles, as described in §600.116. This value may be more or less than the 12-hour minimum charging time specified for testing. You must alternatively specify the charge time based on a standard 120 volt power source if the vehicle cannot be charged at the higher voltage.
(l) California-specific values. If the Administrator determines that automobiles intended for sale in California are likely to exhibit significant differences in fuel economy or other label values from those intended for sale in other states, the Administrator will compute separate values for each class of automobiles for California and for the other states.
[76 FR 39563, July 6, 2011, as amended at 76 FR 57380, Sept. 15, 2011; 77 FR 63184, Oct. 15, 2012; 79 FR 23747, Apr. 28, 2014; 81 FR 74002, Oct. 25, 2016; 88 FR 4483, Jan. 24, 2023; 89 FR 28210, Apr. 18, 2024]
§600.312-08 Labeling, reporting, and recordkeeping; Administrator reviews.
(a)(1) The manufacturer shall determine label values (general and specific) using the procedures specified in subparts C and D of this part and submit the label values, and the data sufficient to calculate the label values, to the Administrator according to the timetable specified in §600.313.
(2) Except under paragraph (a)(4) of this section, the manufacturer is not required to obtain Administrator approval of label values prior to the introduction of vehicles for sale.
(3) The label values that the manufacturer calculates and submits under paragraph (a)(1) of this section shall constitute the EPA fuel economy estimates unless the Administrator determines that they are not calculated according to the procedures specified in subparts C and D of this part.
(4) If required by the Administrator, the manufacturer shall obtain Administrator approval of label values prior to affixing labels to vehicles.
(5)(i) If at any time during the model year, any label values are determined not to be calculated according to the procedures specified in subparts C and D of this part, the Administrator shall notify the manufacturer in writing.
(ii) If the Administrator has sufficient information to enable calculation of the correct label values, this notification shall specify the correct label values which constitute the EPA Fuel Economy Estimates.
(iii) If additional information is required, the Administrator shall request such additional information and a recalculation of the label value by the manufacturer.
(6) If the Administrator determines revised label values under paragraph (a)(5) of this section are lower than the label values calculated by the manufacturer, the manufacturer shall affix the revised labels to all affected new vehicles which are unsold beginning no later than 15 calendar days after the date of notification by the Administrator.
(b)(1) The manufacturer is responsible for affixing vehicle labels that meet the format and content requirements of this subpart.
(2) The manufacturer shall retain for examination, at the Administrator's discretion, typical label formats representing all information required on the manufacturer's fuel economy labels. The information shall include the text of all required and voluntary information as well as the size and color of print and paper, spacing, and location of all printed information. Where the fuel economy label is incorporated with the Automobile Information Disclosure Act label, the above requirements pertain to those sections of the label concerning fuel economy labeling information.
(3) If the Administrator determines upon examination of record that the label format or content do not meet the requirements of this subpart, the Administrator may:
(i) Require the manufacturer to make specific changes in subsequent labels, and
(ii) Require such changes to be implemented on a reasonable timetable, but no sooner than 15 days from the date of notification to the manufacturer.
[49 FR 13852, Apr. 6, 1984. Redesignated at 76 FR 39558, July 6, 2011]
§600.313-08 Timetable for data and information submittal and review.
(a) A manufacturer shall submit to the Administrator fuel economy label values and sufficient information to determine fuel economy label values within the following time constraints (except for manufacturers designated under §600.312(a)(4) who shall submit the information no later than thirty calendar days prior to the date the model type [vehicle] is initially offered for sale.
(1) For initial general label values, no later than five working days before the date that the model type is initially offered for sale;
(2) For specific label values, no later than five working days before any vehicles are offered for sale;
(3) For model types having label values updated because of running changes (as required under §600.314(b)), the submission must be made at least five working days before the date of implementation of the running change.
(b) A manufacturer may not proceed with any label calculation until the data from each vehicle used in such calculation satisfies the requirements of §600.008, except as allowed under the provisions of §600.314-01(e) and approved by the Administrator.
(c) If the Administrator has waived any testing in paragraph (b) of this section and subsequently finds that the decision to waive testing was based on an incorrect data submission or that a fuel economy offset exists (based on subsequent testing of that manufacturer's product line), the Administrator may require confirmation of the data generated by any such waived vehicle.
[64 FR 23975, May 4, 1999. Redesignated at 76 FR 39558, July 6, 2011]
§600.314-08 Updating label values, annual fuel cost, Gas Guzzler Tax, and range of fuel economy for comparable automobiles.
(a) The label values established in §600.312 shall remain in effect for the model year unless updated in accordance with paragraph (b) of this section.
(b)(1) The manufacturer shall recalculate the model type fuel economy values for any model type containing base levels affected by running changes specified in §600.507.
(2) For separate model types created in §600.209-08(a)(2) or §600.209-12(a)(2), the manufacturer shall recalculate the model type values for any additions or deletions of subconfigurations to the model type. Minimum data requirements specified in §600.010(c) shall be met prior to recalculation.
(3) Label value recalculations shall be performed as follows:
(i) The manufacturer shall use updated total model year projected sales for label value recalculations.
(ii) All model year data approved by the Administrator at the time of the recalculation for that model type shall be included in the recalculation.
(iii) Using the additional data under this paragraph (b), the manufacturer shall calculate new model type city and highway values in accordance with §600.210 except that the values shall be rounded to the nearest 0.1 mpg.
(iv) The existing label values, calculated in accordance with §600.210, shall be rounded to the nearest 0.1 mpg.
(4)(i) If the recalculated city or highway fuel economy value in paragraph (b)(3)(iii) of this section is less than the respective city or highway value in paragraph (b)(3)(iv) of this section by 1.0 mpg or more, the manufacturer shall affix labels with the recalculated model type values (rounded to the nearest whole mpg) to all new vehicles of that model type beginning on the day of implementation of the running change.
(ii) If the recalculated city or highway fuel economy value in paragraph (b)(3)(iii) of this section is higher than the respective city or highway value in paragraph (b)(3)(iv) of this section by 1.0 mpg or more, then the manufacturer has the option to use the recalculated values for labeling the entire model type beginning on the day of implementation of the running change.
(c) For fuel economy labels updated using recalculated fuel economy values determined in accordance with paragraph (b) of this section, the manufacturer shall concurrently update all other label information (e.g., the annual fuel cost, range of comparable vehicles and the applicability of the Gas Guzzler Tax as needed).
(d) The Administrator shall periodically update the range of fuel economies of comparable automobiles based upon all label data supplied to the Administrator.
(e) The manufacturer may request permission from the Administrator to calculate and use label values based on test data from vehicles which have not completed the Administrator-ordered confirmatory testing required under the provisions of §600.008-08(b). If the Administrator approves such a calculation the following procedures shall be used to determine if relabeling is required after the confirmatory testing is completed.
(1) The Administrator-ordered confirmatory testing shall be completed as quickly as possible.
(2) Using the additional data under paragraph (e)(1) of this section, the manufacturer shall calculate new model type city and highway values in accordance with §§600.207 and 600.210 except that the values shall be rounded to the nearest 0.1 mpg.
(3) The existing label values, calculated in accordance with §600.210, shall be rounded to the nearest 0.1 mpg.
(4) The manufacturer may need to revise fuel economy labels as follows:
(i) If the recalculated city or highway fuel economy value in paragraph (b)(3)(iii) of this section is less than the respective city or highway value in paragraph (b)(3)(iv) of this section by 0.5 mpg or more, the manufacturer shall affix labels with the recalculated model type MPG values (rounded to the nearest whole number) to all new vehicles of that model type beginning 15 days after the completion of the confirmatory test.
(ii) If both the recalculated city or highway fuel economy value in paragraph (b)(3)(iii) of this section is less than the respective city or highway value in paragraph (b)(3)(iv) of this section by 0.1 mpg or more and the recalculated gas guzzler tax rate determined under the provisions of §600.513-08 is larger, the manufacturer shall affix labels with the recalculated model type values and gas guzzler tax statement and rates to all new vehicles of that model type beginning 15 days after the completion of the confirmatory test.
(5) For fuel economy labels updated using recalculated fuel economy values determined in accordance with paragraph (e)(4) of this section, the manufacturer shall concurrently update all other label information (e.g., the annual fuel cost, range of comparable vehicles and the applicability of the Gas Guzzler Tax if required by Department of Treasury regulations).
[76 FR 39565, July 6, 2011]
§600.315-08 Classes of comparable automobiles.
(a) The Secretary will classify automobiles as passenger automobiles or light trucks (nonpassenger automobiles) in accordance with 49 CFR part 523.
(1) The Administrator will classify passenger automobiles by car line into one of the following classes based on interior volume index or seating capacity except for those passenger automobiles which the Administrator determines are most appropriately placed in a different classification or classed as special purpose vehicles as provided in paragraph (a)(3) of this section.
(i) Two seaters A car line shall be classed as “Two Seater” if the majority of the vehicles in that car line have no more than two designated seating positions as such term is defined in the regulations of the National Highway Traffic Safety Administration, Department of Transportation (DOT), 49 CFR 571.3.
(ii) Minicompact cars. Interior volume index less than 85 cubic feet.
(iii) Subcompact cars. Interior volume index greater than or equal to 85 cubic feet but less than 100 cubic feet.
(iv) Compact cars. Interior volume index greater than or equal to 100 cubic feet but less than 110 cubic feet.
(v) Midsize cars. Interior volume index greater than or equal to 110 cubic feet but less than 120 cubic feet.
(vi) Large cars. Interior volume index greater than or equal to 120 cubic feet.
(vii) Small station wagons. Station wagons with interior volume index less than 130 cubic feet.
(viii) Midsize station wagons. Station wagons with interior volume index greater than or equal to 130 cubic feet but less than 160 cubic feet.
(ix) Large station wagons. Station wagons with interior volume index greater than or equal to 160 cubic feet.
(2) The Administrator will classify light trucks (nonpassenger automobiles) into the following classes: Small pickup trucks, standard pickup trucks, vans, minivans, and SUVs. Starting in the 2013 model year, SUVs will be divided between small sport utility vehicles and standard sport utility vehicles. Pickup trucks and SUVs are separated by car line on the basis of gross vehicle weight rating (GVWR). For a product line with more than one GVWR, establish the characteristic GVWR value for the product line by calculating the arithmetic average of all distinct GVWR values less than or equal to 8,500 pounds available for that product line. The Administrator may determine that specific light trucks should be most appropriately placed in a different class or in the special purpose vehicle class as provided in paragraphs (a)(3)(i) and (ii) of this section, based on the features and characteristics of the specific vehicle, consumer information provided by the manufacturer, and other information available to consumers.
(i) Small pickup trucks. Pickup trucks with a GVWR below 6,000 pounds.
(ii) Standard pickup trucks. Pickup trucks with a GVWR at or above 6,000 pounds and at or below 8,500 pounds.
(iii) Vans.
(iv) Minivans.
(v) Small sport utility vehicles. Sport utility vehicles with a GVWR below 6,000 pounds.
(vi) Standard sport utility vehicles. Sport utility vehicles with a GVWR at or above 6,000 pounds and at or below 10,000 pounds.
(3)(i) Special purpose vehicles. All automobiles with GVWR less than or equal to 8,500 pounds and all medium-duty passenger vehicles which possess special features and which the Administrator determines are more appropriately classified separately from typical automobiles or which do not meet the requirements of paragraphs (a)(1) and (2) of this section will be classified as special purpose vehicles. For example, the Administrator may determine that advanced technology vehicles (such as battery electric vehicles, fuel cell vehicles, plug-in hybrid electric vehicles and vehicles equipped with hydrogen internal combustion engines) should be appropriately classified as a type of “special purpose vehicle.” The Administrator may determine appropriate names for such types of special purpose vehicles, different from the name “special purpose vehicle.”
(ii) All automobiles which possess features that could apply to two classes will be classified by the Administrator based on the Administrator's judgment on which class of vehicles consumers are more likely to make comparisons.
(4) Once a certain car line is classified by the Administrator, the classification will remain in effect for the model year.
(b) Interior volume index - passenger automobiles. (1) The interior volume index shall be calculated for each car line which is not a “two seater” car line, in cubic feet rounded to the nearest 0.1 cubic foot. For car lines with more than one body style, the interior volume index for the car line is the arithmetic average of the interior volume indexes of each body style in the car line.
(2) For all body styles except station wagons and hatchbacks with more than one seat (e.g., with a second or third seat) equipped with seatbelts as required by DOT safety regulations, interior volume index is the sum, rounded to the nearest 0.1 cubic feet, of the front seat volume, the rear seat volume(s), if applicable, and the luggage capacity.
(3) For all station wagons and hatchbacks with more than one seat (e.g., with a second or third seat) equipped with seatbelts as required by DOT safety regulations, interior volume index is the sum, rounded to the nearest 0.1 cubic feet, of the front seat volume, the rear seat volume, and the cargo volume index.
(c) All interior and cargo dimensions are measured in inches to the nearest 0.1 inch. All dimensions and volumes shall be determined from the base vehicles of each body style in each car line, and do not include optional equipment. The dimensions H61, W3, W5, L34, H63, W4, W6, L51, H201, L205, L210, L211, H198, W201, and volume V1 are to be determined in accordance with the procedures outlined in Motor Vehicle Dimensions SAE 1100a (incorporated by reference in §600.011), except as follows:
(1) SAE J1100a(2.3) - Cargo dimensions. All dimensions are measured with the front seat positioned the same as for the interior dimensions and the second seat, for the station wagons and hatchbacks, in the upright position. All head restraints shall be in the stowed position and considered part of the seat.
(2) SAE J1100a(8) - Luggage capacity. Total of columns of individual pieces of standard luggage set plus H boxes stowed in the luggage compartment in accordance with the procedure described in 8.2. For passenger automobiles with no rear seat or with two rear seats with no rear seatbelts, the luggage compartment shall include the area to the rear of the front seat, with the rear seat (if applicable) folded, to the height of a horizontal plane tangent to the top of the front seatback.
(3) SAE J1100a(7) - Cargo dimensions. (i) L210-Cargo length at second seatback height-hatchback. The minimum horizontal dimension from the “X” plane tangent to the rearmost surface of the second seatback to the inside limiting interference of the hatchback door on the zero “Y” plane.
(ii) L211 - Cargo length at floor-second-hatchback. The minimum horizontal dimensions at floor level from the rear of the second seatback to the normal limiting interference of the hatchback door on the vehicle zero “Y” plane.
(iii) H198 - Second seatback to load floor height. The dimension measured vertically from the horizontal tangent to the top of the second seatback to the undepressed floor covering.
(d) The front seat volume is calculated in cubic feet by dividing 1,728 into the product of three terms listed below and rounding the quotient to the nearest 0.001 cubic feet:
(1) H61 - Effective head room-front. (In inches, obtained according to paragraph (c) of this section),
(2)(i) (W3 + W5 + 5)/2-Average of shoulder and hip room-front, if hip room is more than 5 inches less than shoulder room. (In inches, W3 and W5 are obtained according to paragraph (c) of this section), or
(ii) W3-Shoulder room-front, if hip room is not more than 5 inches less than shoulder room. (In inches, W3 is obtained according to paragraph (c) of this section), and
(3) L34 - Maximum effective leg room-accelerator. (In inches, obtained according to paragraph (c) of this section.) Round the quotient to the nearest 0.001 cubic feet.
(e) The rear seat volume is calculated in cubic feet, for vehicles with a rear seat equipped with rear seat belts (as required by DOT), by dividing 1,728 into the product of three terms listed below and rounding the quotient to the nearest 0.001 cubic feet:
(1) H63 - Effective head room-second. (Inches obtained according to paragraph (c) of this section),
(2)(i) (W4 + W6 + 5)/2-Average of shoulder and hip room-second, if hip room is more than 5 inches less than shoulder room. (In inches, W4 and W6 are obtained according to paragraph (c) of this section), or
(ii) W4 - Shoulder room-second, if hip room is not more than 5 inches less than shoulder room. (In inches, W4 is obtained according to paragraph (c) of this section), and
(3) L51 - Minimum effective leg room-second. (In inches obtained according to paragraph (c) of this section.)
(f) The luggage capacity is V1, the usable luggage capacity obtained according to paragraph (c) of this section. For passenger automobiles with no rear seat or with a rear seat but no rear seat belts, the area to the rear of the front seat shall be included in the determination of V1, usable luggage capacity, as outlined in paragraph (c) of this section.
(g) Cargo volume index. (1) For station wagons the cargo volume index V10 is calculated, in cubic feet, by dividing 1,728 into the product of three terms and rounding the quotient to the nearest 0.001 cubic feet:
(i) Average cargo width, which is the arithmetic average of:
(A) W4 - Shoulder room-second (in inches obtained according to paragraph (c) of this section); and
(B) W201 - Cargo width-wheelhouse (in inches obtained according to paragraph (c) of this section).
(ii) H201-Cargo height. (In inches obtained according to paragraph (c) of this section.)
(iii) L205-Cargo length at belt-second. (In inches obtained according to paragraph (c) of this section.)
(2) For hatchbacks, the cargo volume index V11 is calculated, in cubic feet, by dividing 1,728 into the product of three terms and rounding the quotient to the nearest 0.001 cubic foot:
(i) Average cargo length, which is the arithmetic average of:
(A) L210-Cargo length at second seatback height-hatchback. (In inches obtained according to paragraph (c) of this section);
(B) L211-Cargo length at floor-second-hatchback. (In inches obtained according to paragraph (c) of this section);
(ii) W4-Shoulder room-second. (In inches obtained according to paragraph (c) of this section);
(iii) H198 - Second seatback to load floor height. (In inches obtained according to paragraph (c) of this section.)
(h) The following data must be submitted to the Administrator no later than the time of a general label request. Data shall be included for each body style in the car line covered by that general label.
(1) For all passenger automobiles:
(i) Dimensions H61, W3, L34 determined in accordance with paragraph (c) of this section.
(ii) Front seat volume determined in accordance with paragraph (d) of this section.
(iii) Dimensions H63, W4, L51 (if applicable) determined in accordance with paragraph (c) of this section.
(iv) Rear seat volume (if applicable) determined in accordance with paragraph (e) of this section.
(v) The interior volume index determined in accordance with paragraph (b) of this section for:
(A) Each body style, and
(B) The car line.
(vi) The class of the car line as determined in paragraph (a) of this section.
(2) For all passenger automobiles except station wagons and hatchbacks with more than one seat (e.g., with a second or third seat) equipped with seat belts as required by DOT safety regulations:
(i) The quantity and letter designation of the pieces of the standard luggage set installed in the vehicle in the determination of usable luggage capacity V1, and
(ii) The usable luggage capacity V1, determined in accordance with paragraph (f) of this section.
(3) For station wagons with more than one seat (e.g., with a second or third seat) equipped with seat belts as required by DOT safety regulations:
(i) The dimensions H201, L205, and W201 determined in accordance with paragraph (c) of this section, and
(ii) The cargo volume index V10 determined in accordance with paragraph (g)(1) of this section.
(4) For hatchbacks with more than one seat (e.g., with a second or third seat) equipped with seat belts as required by DOT safety regulations:
(i) The dimensions L210, L211, and H198 determined in accordance with paragraph (c) of this section.
(ii) The cargo volume index V11 determined in accordance with paragraph (g)(2) of this section.
(5) For pickup trucks:
(i) All GVWR's of less than or equal to 8,500 pounds available in the car line.
(ii) The arithmetic average GVWR for the car line.
[71 FR 77952, Dec. 27, 2006; 72 FR 7921, Feb. 21, 2007, as amended at 74 FR 61552, Nov. 25, 2009; 76 FR 39566, July 6, 2011]
§600.316-08 Multistage manufacture.
Where more than one person is the manufacturer of a vehicle, the final stage manufacturer (as defined in 49 CFR 529.3) is treated as the vehicle manufacturer for purposes of compliance with this subpart.
[76 FR 39566, July 6, 2011]