['Air Programs']
['Greenhouse Gases']
06/26/2024
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, EPA must publish a document in the Federal Register and the material must be available to the public. All approved incorporation by reference (IBR) material is available for inspection at EPA and at the National Archives and Records Administration (NARA). Contact EPA at: U.S. EPA, Air and Radiation Docket Center, WJC West Building, Room 3334, 1301 Constitution Ave. NW, Washington, DC 20004; www.epa.gov/dockets ; (202) 202-1744. For information on inspecting this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations.html or email fr.inspection@nara.gov . The material may be obtained from the following sources:
(a) ASTM International (ASTM). ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; (610) 832-9585; www.astm.org .
(1) ASTM D86-23, Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure; Approved March 1, 2023; IBR approved for §600.113-12(f).
(2) ASTM D975-13a, Standard Specification for Diesel Fuel Oils, Approved December 1, 2013; IBR approved for §600.107-08(b).
(3) ASTM D1298-12b, Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method, Approved June 1, 2012; IBR approved for §§600.113-12(f); 600.510-12(g).
(4) ASTM D1319-20a, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption, Approved August 1, 2020; IBR approved for §600.113-12(f).
(5) ASTM D1945-03 (Reapproved 2010), Standard Test Method for Analysis of Natural Gas By Gas Chromatography, Approved January 1, 2010; IBR approved for §600.113-12(f) and (k).
(6) ASTM D3338/D3338M-20a, Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels, Approved December 1, 2020; IBR approved for §600.113-12(f).
(7) ASTM D3343-22, Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels, Approved November 1, 2022; IBR approved for §600.113-12(f).
(8) ASTM D4052-22, Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter, Approved May 1, 2022; IBR approved for §600.113-12(f).
(9) ASTM D4815-22, Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C 1 to C 4 Alcohols in Gasoline by Gas Chromatography, Approved April 1, 2022; IBR approved for §600.113-12(f).
(10) ASTM D5599-22, Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection, Approved April 1, 2022; IBR approved for §600.113-12(f).
(11) ASTM D5769-22, Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry, Approved July 1, 2022; IBR approved for §600.113-12(f).
(b) International Organization for Standardization (ISO). International Organization for Standardization, Case Postale 56, CH-1211 Geneva 20, Switzerland; (41) 22749 0111; central@iso.org ; www.iso.org .
(1) ISO/IEC 18004:2006(E), Information technology—Automatic identification and data capture techniques—QR Code 2005 bar code symbology specification, Second Edition, September 1, 2006; IBR approved for §600.302-12(b).
(2) [Reserved]
(c) SAE International (SAE). SAE International, 400 Commonwealth Dr., Warrendale, PA 15096-0001; (877) 606-7323 (U.S. and Canada) or (724) 776-4970 (outside the U.S. and Canada); www.sae.org .
(1) Motor Vehicle Dimensions—Recommended Practice SAE 1100a (Report of Human Factors Engineering Committee, Society of Automotive Engineers, approved September 1973 as revised September 1975); IBR approved for §600.315-08(c).
(2) SAE J1634 JUL2017, Battery Electric Vehicle Energy Consumption and Range Test Procedure, Revised July 2017; IBR approved for §§600.116-12(a); 600.210-12(d); 600.311-12(j) and (k).
(3) SAE J1711 FEB2023, Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles; Revised February 2023; IBR approved for §§600.114-12(c) and (f); 600.116-12(b) and (c); 600.311-12(c), (j), and (k).
[76 FR 39530, July 6, 2011, as amended at 76 FR 57379, Sept. 15, 2011; 79 FR 23746, Apr. 28, 2014; 88 FR 4480, Jan. 24, 2023; 89 FR 28201, Apr. 18, 2024]
READ MORESHOW LESS
['Air Programs']
['Greenhouse Gases']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.