...
§1090.1200 General recordkeeping requirements.
(a) Length of time records must be kept. Records required under this part must be kept for 5 years from the date they were created, except that records relating to credit transfers must be kept by the transferor for 5 years from the date the credits were transferred and must be kept by the transferee for 5 years from the date the credits were transferred, used, or terminated, whichever is later.
(b) Make records available to EPA. On request by EPA, the records specified in this part must be provided to EPA. For records that are electronically generated or maintained, the equipment and software necessary to read the records must be made available or, upon approval by EPA, electronic records must be converted to paper documents that must be provided to EPA.
[85 FR 78469, Dec. 4, 2020]
§1090.1205 Recordkeeping requirements for all regulated parties.
(a) Overview. Any party subject to the requirements and provisions of this part must keep records containing the information specified in this section.
(b) PTDs. Any party that transfers custody or title of any fuel, fuel additive, or regulated blendstock must maintain the PTDs for which the party is the transferor or transferee.
(c) Sampling and testing. Any party that performs any sampling and testing on any fuel, fuel additive, or regulated blendstock must keep records of the following information:
(1) The location, date, time, and storage tank or truck, rail car, or vessel identification for each sample collected.
(2) The identification of the person(s) who collected the sample and the person(s) who performed the testing.
(3) The results of all tests as originally printed by the testing apparatus, or where no printed result is produced, the results as originally recorded by the person or apparatus that performed the test. Where more than one test is performed, all the results must be retained.
(4) The methodology used for any testing under this part.
(5) Records related to performance-based measurement and statistical quality control under §§1090.1360 through 1090.1375.
(6) Records related to gasoline deposit control testing under §1090.1395.
(7) Records demonstrating the actions taken to stop the sale of any fuel, fuel additive, or regulated blendstock that is found not to be in compliance with applicable standards under this part, and the actions taken to identify the cause of any noncompliance and prevent future instances of noncompliance.
(d) Registration. Any party required to register under subpart I of this part must maintain records supporting the information required to complete and maintain the registration for the party's company and each registered facility. The party must also maintain copies of any confirmation received from the submission of such registration information to EPA.
(e) Reporting. Any party required to submit reports under subpart J of this part must maintain copies of all reports submitted to EPA. The party must also maintain copies of any confirmation received from the submission of such reports to EPA.
(f) Exemptions. Any party that produces or distributes exempt fuel, fuel additive, or regulated blendstock under subpart G of this part must keep the following records:
(1) Records demonstrating the designation of the fuel, fuel additive, or regulated blendstock under subparts G and K of this part.
(2) Copies of PTDs generated or accompanying the exempt fuel, fuel additive, or regulated blendstock.
(3) Records demonstrating that the exempt fuel, fuel additive, or regulated blendstock was actually used in accordance with the requirements of the applicable exemption(s) under subpart G of this part.
[85 FR 78469, Dec. 4, 2020]
§1090.1210 Recordkeeping requirements for gasoline manufacturers.
(a) Overview. In addition to the requirements in §1090.1205, a gasoline manufacturer must keep records for each of their facilities that include the information in this section.
(b) Batch records. For each batch of gasoline, a gasoline manufacturer must keep records of the following information:
(1) The results of tests, including any calculations necessary to transcribe or correlate test results into reported values under subpart J of this part, performed to determine gasoline properties and characteristics as specified in subpart N of this part.
(2) The batch volume.
(3) The batch number.
(4) The date the batch was produced or imported.
(5) The designation of the batch under §1090.1010.
(6) The PTDs for any gasoline produced or imported.
(7) The PTDs for any gasoline received.
(c) Downstream oxygenate accounting. For BOB for which the gasoline manufacturer has accounted for oxygenate added downstream under §1090.710, a gasoline manufacturer must keep records of the following information:
(1) The test results for hand blends prepared under §1090.1340.
(2) Records that demonstrate that the gasoline manufacturer participates in the NFSP under §1090.1405.
(3) Records that demonstrate that the gasoline manufacturer participates in the NSTOP under §1090.1450.
(4) Compliance calculations specified in §1090.700 based on an assumed addition of oxygenate.
(d) PCG and TGP. For new batches of gasoline produced by adding blendstock to PCG or TGP, a gasoline manufacturer must keep records of the following information:
(1) Records that reflect the storage and movement of the PCG or TGP and blendstock within the fuel manufacturing facility to the point such PCG or TGP is used to produce gasoline or BOB.
(2) For new batches of gasoline produced by adding blendstock to PCG or TGP under §1090.1320(a)(1) or §1090.1325, respectively, keep records of the following additional information:
(i) The results of tests to determine the sulfur content, benzene content, oxygenate(s) content, and in the summer, RVP, for the PCG or TGP and volume of the PCG or TGP when received at the fuel manufacturing facility.
(ii) Records demonstrating which specific batches of PCG or TGP were used in each new batch of gasoline.
(iii) Records demonstrating which blendstocks were used in each new batch of gasoline.
(iv) Records of the test results for sulfur content, benzene content, oxygenate(s) content, distillation parameters, and in the summer, RVP, for each new batch of gasoline.
(3) For new batches of gasoline produced by adding blendstock to PCG or TGP under §1090.1320(a)(2), keep records of the following additional information:
(i) Records of the test results for sulfur content, benzene content, oxygenate(s) content, and in the summer, RVP, of each blendstock used to produce the new batch of gasoline.
(ii) Records of the test results for sulfur content and in the summer, RVP, of each new batch of gasoline.
(iii) Records demonstrating which blendstocks were used in each new batch of gasoline.
(e) Certified butane and certified pentane blenders. For certified butane or certified pentane blended into gasoline or BOB under §1090.1320, a certified butane or certified pentane blender must keep records of the following information:
(1) The volume of certified butane or certified pentane added.
(2) The purity and properties of the certified butane or certified pentane specified in §1090.250 or §1090.255, respectively.
(f) Importation of gasoline treated as blendstock. For any imported GTAB, an importer must keep records of documents that reflect the storage and physical movement of the GTAB from the point of importation to the point of blending to produce gasoline or the point at which the GTAB was certified as gasoline.
(g) ABT. A gasoline manufacturer must keep records of the following information related to their ABT activities under subpart H of this part, as applicable:
(1) Compliance sulfur values and compliance benzene values under §1090.700, and the calculations used to determine those values.
(2) The number of valid credits in possession of the gasoline manufacturer at the beginning of each compliance period, separately by facility and compliance period of generation.
(3) The number of credits generated by the gasoline manufacturer under §1090.725, separately by facility and compliance period of generation.
(4) If any credits were obtained from or transferred to other parties, all the following for each other party:
(i) The party's name.
(ii) The party's EPA company registration numbers.
(iii) The number of credits obtained from or transferred to the party.
(5) The number of credits that expired at the end of each compliance period, separately by facility and compliance period of generation.
(6) The number of credits that will be carried over into the next compliance period, separately by facility and compliance period of generation.
(7) The number of credits used, separately by facility and compliance period of generation.
(8) Contracts or other commercial documents that establish each transfer of credits from the transferor to the transferee.
(9) Documentation that supports the number of credits transferred between facilities within the same company (i.e., intracompany transfers).
[85 FR 78469, Dec. 4, 2020]
§1090.1215 Recordkeeping requirements for diesel fuel, ECA marine fuel, and distillate global marine fuel manufacturers.
(a) Overview. In addition to the requirements in §1090.1205, a diesel fuel or ECA marine fuel manufacturer must keep records for each of their facilities that include the information in this section.
(b) Batch records. For each batch of ULSD, 500 ppm LM diesel fuel, or ECA marine fuel, a diesel fuel or ECA marine fuel manufacturer must keep records of the following information:
(1) The batch volume.
(2) The batch number.
(3) The date the batch was produced or imported.
(4) The designation of the batch under §1090.1015.
(5) All documents and information created or used for the purpose of batch designation under §1090.1015, including PTDs for the batch.
(c) Distillate global marine fuel manufacturers. For distillate global marine fuel, a distillate global marine fuel manufacturer must keep records of the following information:
(1) The designation of the fuel as distillate global marine fuel.
(2) The PTD for the distillate global marine fuel.
[85 FR 78469, Dec. 4, 2020]
§1090.1220 Recordkeeping requirements for oxygenate blenders.
(a) Overview. In addition to the requirements in §1090.1205, an oxygenate blender that blends oxygenate into gasoline must keep records that include the information in this section.
(b) Oxygenate blenders. For each occasion that an oxygenate blender blends oxygenate into gasoline, the oxygenate blender must keep records of the following information:
(1) The date, time, location, and identification of the blending tank or truck in which the blending occurred.
(2) The volume and oxygenate requirement of the gasoline to which oxygenate was added.
(3) The volume, type, and purity of the oxygenate that was added, and documents that show the supplier(s) of the oxygenate used.
[85 FR 78469, Dec. 4, 2020]
§1090.1225 Recordkeeping requirements for gasoline additives.
(a) Gasoline additive manufacturers. In addition to the requirements in §1090.1205, a gasoline additive manufacturer must keep records of the following information for each batch of additive produced or imported:
(1) The batch volume.
(2) The date the batch was produced or imported.
(3) The PTD for the batch.
(4) The maximum recommended treatment rate.
(5) The gasoline additive manufacturer's control practices that demonstrate that the additive will contribute no more than 3 ppm on a per-gallon basis to the sulfur content of gasoline when used at the maximum recommended treatment rate.
(b) Parties that take custody of gasoline additives. Except for gasoline additives packaged for addition to gasoline in the vehicle fuel tank, all parties that take custody of gasoline additives for bulk addition to gasoline—from the producer through to the gasoline additive blender that adds the additive to gasoline—must keep records of the following information:
(1) The PTD for each batch of gasoline additive.
(2) The treatment rate at which the additive was added to gasoline, as applicable.
(3) The volume of gasoline that was treated with the additive, as applicable. A new record must be initiated in each case where a new batch of additive is mixed into a storage tank from which the additive is drawn to be injected into gasoline.
[85 FR 78469, Dec. 4, 2020]
§1090.1230 Recordkeeping requirements for oxygenate producers.
(a) Oxygenate producers. In addition to the requirements in §1090.1205, an oxygenate producer must keep records of the following information for each batch of oxygenate:
(1) The batch volume.
(2) The batch number.
(3) The date the batch was produced or imported.
(4) The PTD for the batch.
(5) The sulfur content of the batch.
(6) The sampling and testing records specified in §1090.1205(c), if the sulfur content of the batch was determined by analytical testing.
(b) DFE producers. In addition to the requirements of paragraph (a) of this section, a DFE producer must keep records of the following information for each batch of DFE if the sulfur content of the batch was determined under §1090.1330:
(1) The name and title of the person who calculated the sulfur content of the batch.
(2) The date the calculation was performed.
(3) The calculated sulfur content.
(4) The sulfur content of the neat (un-denatured) ethanol.
(5) The date each batch of neat ethanol was produced.
(6) The neat ethanol batch number.
(7) The neat ethanol batch volume.
(8) As applicable, the neat ethanol production quality control records, or the test results on the neat ethanol, including all the following:
(i) The location, date, time, and storage tank or truck identification for each sample collected.
(ii) The name and title of the person who collected the sample and the person who performed the test.
(iii) The results of the test as originally printed by the testing apparatus, or where no printed result is produced, the results as originally recorded by the person who performed the test.
(iv) Any record that contains a test result for the sample that is not identical to the result recorded in paragraph (b)(8)(iii) of this section.
(v) The test methodology used.
(9) The sulfur content of each batch of denaturant used, and the volume percent at which the denaturant was added to neat (un-denatured) ethanol to produce DFE.
(10) The PTD for each batch of denaturant used.
(c) Parties that take custody of oxygenate. All parties that take custody of oxygenate—from the oxygenate producer through to the oxygenate blender—must keep records of the following information:
(1) The PTD for each batch of oxygenate.
(2) [Reserved]
[85 FR 78469, Dec. 4, 2020]
§1090.1235 Recordkeeping requirements for ethanol denaturant.
(a) Certified ethanol denaturant producers. In addition to the requirements in §1090.1205, a certified ethanol denaturant producer must keep records of the following information for each batch of certified ethanol denaturant:
(1) The batch volume.
(2) The batch number.
(3) The date the batch was produced or imported.
(4) The PTD for the batch.
(5) The sulfur content of the batch.
(b) Parties that take custody of ethanol denaturants. All parties that take custody of denaturant designated as suitable for use in the production of DFE under §1090.270(b) must keep records of the following information:
(1) The PTD for each batch of denaturant.
(2) The volume percent at which the denaturant was added to ethanol, as applicable.
[85 FR 78469, Dec. 4, 2020]
§1090.1240 Recordkeeping requirements for gasoline detergent blenders.
(a) Overview. In addition to the requirements in §1090.1205, a gasoline detergent blender must keep records that include the information in this section.
(b) Gasoline detergent blenders. A gasoline detergent blender must keep records of the following information:
(1) The PTD for each detergent used.
(2) For an automated detergent blending facility, the following information:
(i) The dates of the VAR Period.
(ii) The total volume of detergent blended into gasoline, as determined using one of the following methods, as applicable:
(A) For a facility that uses in-line meters to measure the amount of detergent blended, the total volume of detergent measured, together with supporting data that includes one of the following:
(1) The beginning and ending meter readings for each meter being measured.
(2) Other comparable metered measurements.
(B) For a facility that uses a gauge to measure the inventory of the detergent storage tank, the total volume of detergent must be calculated as follows:
V = DI − DI DI − DI
Where:
VD = Volume of detergent.
DIi = Initial detergent inventory of the tank.
DIf = Final detergent inventory of the tank.
DIa = Sum of any additions to detergent inventory.
DIw = Sum of any withdrawals from detergent inventory for purposes other than the additization of gasoline.
(C) The value of each variable in the equation in paragraph (b)(2)(ii)(B) of this section must be separately recorded. Recorded volumes of detergent must be expressed to the nearest gallon (or smaller units), except that detergent volumes of five gallons or less must be expressed to the nearest tenth of a gallon (or smaller units). However, if the blender's equipment is unable to accurately measure to the nearest tenth of a gallon, then such volumes must be rounded downward to the next lower gallon.
(iii) The total volume of gasoline to which detergent has been added, together with supporting data that includes one of the following:
(A) The beginning and ending meter measurements for each meter being measured.
(B) The metered batch volume measurements for each meter being measured.
(C) Other comparable metered measurements.
(iv) The actual detergent concentration, calculated as the total volume of detergent added (as determined under paragraph (b)(2)(ii) of this section) divided by the total volume of gasoline (as determined under paragraph (b)(2)(iii) of this section). The concentration must be calculated and recorded to four digits and rounded as specified in §1090.50.
(v) The initial detergent concentration rate, together with the date and description of each adjustment to any initially set concentration.
(vi) If the detergent injector is set below the applicable LAC, or adjusted by more than 10 percent above the concentration initially set in the VAR Period, documentation establishing that the purpose of the change is to correct a batch misadditization prior to the end of the VAR Period and prior to the transfer of the batch to another party or to correct an equipment malfunction and the date and adjustments of the correction.
(vii) Documentation reflecting the performance and results of the calibration of detergent equipment under §1090.1390.
(3) For a non-automated detergent blending facility, keep records of the following information:
(i) The date of additization.
(ii) The volume of detergent added.
(iii) The volume of gasoline to which the detergent was added.
(iv) The actual detergent concentration, calculated as the volume of detergent added (per paragraph (b)(3)(ii) of this section) divided by the volume of gasoline (per paragraph (b)(3)(iii) of this section). The concentration must be calculated and recorded to four digits and rounded as specified in §1090.50.
[85 FR 78469, Dec. 4, 2020]
§1090.1245 Recordkeeping requirements for independent surveyors.
(a) Overview. In addition to the requirements in §1090.1205, an independent surveyor must keep records that include the information in this section.
(b) Independent surveyors. An independent surveyor must keep records of the following information, as applicable:
(1) Records related to the NFSP under §1090.1405.
(2) Records related to a geographically-focused E15 survey program under §1090.1420(b).
(3) Records related to the NSTOP under §1090.1450.
[85 FR 78469, Dec. 4, 2020]
§1090.1250 Recordkeeping requirements for auditors.
(a) Overview. In addition to the requirements in §1090.1205, an auditor must keep records that include the information in this section.
(b) Auditors. An auditor must keep records of the following information:
(1) Documents pertaining to the performance of each audit performed under subpart S of this part, including all correspondence between the auditor and the fuel manufacturer.
(2) Copies of each attestation report prepared and all related records developed to prepare the attestation report.
[85 FR 78469, Dec. 4, 2020]
§1090.1255 Recordkeeping requirements for transmix processors, transmix blenders, transmix distributors, and pipeline operators.
(a) Overview. In addition to the requirements in §1090.1205, a transmix processor, transmix blender, transmix distributor, or pipeline operator must keep records that include the information in this section.
(b) Transmix. (1) A transmix processor or transmix distributor must keep records that reflect the results of any sampling and testing required under subpart F or M of this part.
(2) A transmix processor must keep records showing the volumes of TGP recovered from transmix and the type and amount of any blendstock or PCG added to make gasoline from TGP under §1090.505.
(3) A transmix processor that adds blendstock to TGP or PCG must keep records under §1090.1210(d).
(4) A transmix blender must keep records showing compliance with the quality assurance program and/or sampling and testing requirements in §1090.500, and for each batch of gasoline with which transmix is blended, the volume of the batch, and the volume of transmix blended into the batch.
(c) 500 ppm LM diesel fuel. A manufacturer or distributor of 500 ppm LM diesel fuel using transmix must keep records of the following information, as applicable:
(1) Copies of the compliance plan required under §1090.515(g).
(2) Documents demonstrating how the party complies with each applicable element of the compliance plan under §1090.515(g).
(3) Documents and copies of calculations used to determine compliance with the 500 ppm LM diesel fuel volume requirements under §1090.515(c).
(4) Documents or information that demonstrates that the 500 ppm LM diesel fuel was only used in locomotive and marine engines that are not required to use ULSD under 40 CFR 1033.815 and 40 CFR 1042.660, respectively.
(d) Pipeline operators. A pipeline operator must keep records that demonstrate compliance with the interface handling practices in §1090.520.
[85 FR 78469, Dec. 4, 2020]
[85 FR 78469, Dec. 4, 2020]