Compliance Just Got Easier: Stay ahead of regulatory changes with instant notifications on updates that matter.
['Water Programs']
['Point Sources']
12/04/2024
Subpart H - Wet Digestion Reclaimed Rubber Subcategory
§428.80 Applicability; description of the wet digestion reclaimed rubber subcategory.
The provisions of this subpart are applicable to process waste water discharges resulting from the production of reclaimed rubber by use of the wet digestion process.
§428.81 Specialized definitions.
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
§428.82 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
| Effluent characteristic | Effluent limitations | |
|---|---|---|
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed - | |
| 1 Within the range 6.0 to 9.0. | ||
| Metric units (kg/kkg of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | 0.40 | 0.144 |
| TSS | 1.04 | 0.52 |
| pH | ( 1) | ( 1) |
| English units (lb/1,000 lb of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | 0.40 | 0.144 |
| TSS | 1.04 | 0.52 |
| pH | ( 1) | ( 1) |
[40 FR 2341, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]
§428.83 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
| Effluent characteristic | Effluent limitations | |
|---|---|---|
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed - | |
| 1 Within the range 6.0 to 9.0. | ||
| Metric units (kg/kkg of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | 0.40 | 0.144 |
| TSS | 1.04 | 0.52 |
| pH | ( 1) | ( 1) |
| English units (lb/1,000 lb of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | 0.40 | 0.144 |
| TSS | 1.04 | 0.52 |
| pH | ( 1) | ( 1) |
§428.84 [Reserved]
§428.85 Standards of performance for new sources.
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
| Effluent characteristic | Effluent limitations | |
|---|---|---|
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed - | |
| 1 Within the range 6.0 to 9.0. | ||
| Metric units (kg/kkg of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | 0.40 | 0.144 |
| TSS | 1.04 | 0.52 |
| pH | ( 1) | ( 1) |
| English units (lb/1,000 lb of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | 0.40 | 0.144 |
| TSS | 1.04 | 0.52 |
| pH | ( 1) | ( 1) |
§428.86 Pretreatment standards for new sources.
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
| Pollutant or pollutant property | Pretreatment standards | |
|---|---|---|
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed - | |
| 1 100 mg/l. 2 No limitation. | ||
| Metric units (kg/kkg of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | ( 1) | ( 1) |
| TSS | ( 2) | ( 2) |
| pH | ( 2) | ( 2) |
| English units (lb/1,000 lb of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | ( 1) | ( 1) |
| TSS | ( 2) | ( 2) |
| pH | ( 2) | ( 2) |
[40 FR 2341, Jan. 10, 1975, as amended at 60 FR 33964, June 29, 1995]
['Water Programs']
['Point Sources']
UPGRADE TO CONTINUE READING
ezExplanations
Results Aided by AI
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2026 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
