Compliance Just Got Easier: Stay ahead of regulatory changes with instant notifications on updates that matter.

LEARN MORE

FREE TRIAL UPGRADE!
Thank you for investing in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content. Click 'UPGRADE' to continue.
CANCEL
YOU'RE ALL SET!
Enjoy your limited-time access to the Compliance Network!
A confirmation welcome email has been sent to your email address from ComplianceNetwork@t.jjkellercompliancenetwork.com. Please check your spam/junk folder if you can't find it in your inbox.
YOU'RE ALL SET!
Thank you for your interest in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content.
WHOOPS!
You've reached your limit of free access, if you'd like more info, please contact us at 800-327-6868.
CLOSE
 
 

SAE J 1063 Cantilevered boom crane structures - Method of test (J1063)

RegSenseMobile CranesCranes, Lifts, and ScaffoldingSafety & HealthConstruction SafetyDerricksSociety of Automotive Engineers (SAE)Consensus StandardsIndustry Consensus StandardEnglishFocus AreaUSA

This standard for mobile construction cantilever boom cranes gives testing methods for stress measurements.

Current edition

  • SAE J 1063-2013 Cantilevered Boom Crane Structures - Method of Test

Incorporation by reference

The following editions have been incorporated by reference (IBR) into the Code of Federal Regulations (CFR):

IBR approved for Overview of requirements IBR approved edition
29 CFR 1926.1433(c)(1)(i)Employers must ensure mobile (including crawler and truck) and locomotive cranes manufactured on or after November 8, 2010 meet the prototype testing requirements in Test Option A or Test Option B of 1926.1433. Tower cranes manufactured on or after November 8, 2010 must meet the prototype testing requirements in BS EN 14439:2006. (1) Test Option A. (i) The following applies to equipment with cantilevered booms (such as hydraulic boom cranes): All the tests listed in SAE J1063 (Nov. 1993) Table 1 must be performed to load all critical structural elements to their respective limits. All the strength margins listed in SAE J1063 (Nov. 1993) Table 2 must be met.SAE J1063 (rev. Nov. 1993), Cantilevered Boom Crane Structures-Method of Test.
29 CFR 1926.1433(c)(2)(i)Employers must ensure that for equipment with cantilevered booms (such as hydraulic boom cranes): The analysis methodology (computer modeling) demonstrated that all load cases listed in SAE J1063 (Nov. 1993) meet the strength margins listed in SAE J1063 (Nov. 1993) Table 2.SAE J1063 (rev. Nov. 1993), Cantilevered Boom Crane Structures-Method of Test.
29 CFR 1926.1433(c)(2)(iii)Prototype testing: mobile (including crawler and truck) and locomotive cranes manufactured on or after November 8, 2010 must meet the prototype testing requirements in Test Option A or Test Option B of 1926.1433. Tower cranes manufactured on or after November 8, 2010 must meet the prototype testing requirements in BS EN 14439:2006. Test Option A: (i) The following applies to equipment with cantilevered booms (such as hydraulic boom cranes): All the tests listed in SAE J1063 (Nov. 1993) Table 1 must be performed to load all critical structural elements to their respective limits. All the strength margins listed in SAE J1063 (Nov. 1993) Table 2 must be met. (ii) The following applies to equipment with pendant supported lattice booms: All the tests listed in SAE J987 (Jun. 2003) Table 1 must be performed to load all critical structural elements to their respective limits. All the strength margins listed in SAE J987 (Jun. 2003) Table 2 must be met. Test Option B. The testing and verification requirements of BS EN 13000:2004 must be met. In applying BS EN 13000:2004, the following additional requirements must be met: (iii) Analysis verification. The physical testing requirements under SAE J1063 (Nov. 1993) and SAE J987 (Jun. 2003) must be met unless the reliability of the analysis methodology (computer modeling) has been demonstrated by a documented history of verification through strain gauge measuring or strain gauge measuring in combination with other physical testing.SAE J1063 (rev. Nov. 1993), Cantilevered Boom Crane Structures-Method of Test.

How to purchase

Standards are available for purchase from the American National Standards Institute (ANSI), see webstore.ansi.org, and from the Society of Automotive Engineers (SAE) International, see www.sae.org.

['Cranes, Lifts, and Scaffolding']
['Derricks', 'Mobile Cranes']
UPGRADE TO CONTINUE READING