FREE TRIAL UPGRADE!
Thank you for investing in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content. Click 'UPGRADE' to continue.
CANCEL
YOU'RE ALL SET!
Enjoy your limited-time access to the Compliance Network!
A confirmation welcome email has been sent to your email address from ComplianceNetwork@t.jjkellercompliancenetwork.com. Please check your spam/junk folder if you can't find it in your inbox.
YOU'RE ALL SET!
Thank you for your interest in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content.
WHOOPS!
You've reached your limit of free access, if you'd like more info, please contact us at 800-327-6868.
CLOSE
 
 

...

NFPA 664 Standard for the prevention of fires and explosions in wood processing and woodworking facilities (ANSI Z12.20)

RegSenseEnforcement and Audits - OSHAEnforcement and Audits - OSHASawmillsSafety & HealthGeneral Industry SafetySpecialized IndustriesConsensus StandardsIndustry Consensus StandardNational Fire Protection Association (NFPA)EnglishFocus AreaUSA

This standard describes provisions to prevent fire and explosion due to dust and chips creating during processing or manufacturing of word products.

Current edition

  • NFPA 664-2017 Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities, 2017 Edition

Incorporation by reference

The following editions have been incorporated by reference (IBR) into the Code of Federal Regulations (CFR):

1ANSI Z12.20 was superseded by NFPA 664.
IBR approved for Overview of requirements IBR approved edition
29 CFR 1910.265(c)(20)(i)Employers must ensure blower collecting and   and exhaust systems are designed, constructed, and maintained in accordance with American National Standards Z33.1-1961 (For the Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying) and Z12.2-1962 (R1969) (Code for the Prevention of Dust Explosion in Woodworking and Wood Flour Manufacturing Plants).ANSI Z12.20-62 (R 69) Code for the Prevention of Dust Explosions in Woodworking and Wood Flour Manufacturing Plants.1

How to purchase

Standards are available for purchase from the American National Standards Institute (ANSI), see webstore.ansi.org, and from the National Fire Protection Association (NFPA), see catalog.nfpa.org.

['Enforcement and Audits - OSHA', 'Specialized Industries']
['Sawmills', 'Enforcement and Audits - OSHA']
UPGRADE TO CONTINUE READING
Load More