['Enforcement and Audits - OSHA', 'Heavy Equipment and Vehicles']
['Heavy Equipment and Vehicles', 'Enforcement and Audits - OSHA']
05/05/2022
...
This standard describes requirements for roll-over protective structures on earth moving machines, and providing ways to evaluate those structures.
Current edition
- ISO 3471:2008 (R2018) Earth-Moving Machinery - Roll-Over Protective Structures - Laboratory Tests and Performance Requirements, 4th Edition (Reaffirmed)
Incorporation by reference
The following editions have been incorporated by reference (IBR) into the Code of Federal Regulations (CFR):
IBR approved for | Overview of requirements | IBR approved edition |
---|---|---|
29 CFR 1926.1001(b) | Employers must ensure that for equipment listed in 1926.1001(a) (excluding compactors and rubber-tired skid steer equipment) manufactured before July 15, 2019, the protective frames conform to the following Society of Automotive Engineers Recommended Practices as applicable: SAE J320a, Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers; SAE J394, Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired Front End Loaders and Rubber-Tired Dozers; SAE J395, Minimum Performance Criteria for Roll-Over Protective Structure for Crawler Tractors and Crawler-Type Loaders; SAE J396, Minimum Performance Criteria for Roll-Over Protective Structure for Motor Graders; and SAE J397, Critical Zone Characteristics and Dimensions for Operators of Construction and Industrial Machinery, as applicable, or comply with ISO 3471:2008. | ISO 3471:2008(E), Earth-moving machinery—Roll-over protective structures—Laboratory tests and performance requirements, Fourth Edition. |
29 CFR 1926.1001(c) | Employers must ensure that for equipment listed in 1926.1001(a) manufactured on or after July 15, 2019, the protective frames meet the test and performance requirements of the International Organization for Standardization (ISO) standard ISO 3471:2008 Earth-Moving Machinery—Roll-over protective structures—Laboratory tests and performance requirements. | ISO 3471:2008(E), Earth-moving machinery—Roll-over protective structures—Laboratory tests and performance requirements, Fourth Edition. |
29 CFR 1926.1002(c) | Employers must ensure that for equipment manufactured on or after July 15, 2019, the protective frames meet the test and performance requirements of the International Organization for Standardization (ISO) standard ISO 5700:2013, Tractors for agriculture and forestry—Roll-over protective structures—static test method and acceptance conditions or ISO 3471:2008 Earth-Moving Machinery—Roll-over protective structures—Laboratory tests and performance requirements. | ISO 3471:2008(E), Earth-moving machinery—Roll-over protective structures—Laboratory tests and performance requirements, Fourth Edition. |
How to purchase
Standards are available for purchase from the American National Standards Institute (ANSI), see webstore.ansi.org, and from the International Standards Institutes (ISO), see www.iso.org.
['Enforcement and Audits - OSHA', 'Heavy Equipment and Vehicles']
['Heavy Equipment and Vehicles', 'Enforcement and Audits - OSHA']
UPGRADE TO CONTINUE READING
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2025 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.