['CMV Parts and Maintenance']
['Vehicle maintenance']
10/30/2024
...
This Appendix A–1 applies to not less than 50 percent of a manufacturer’s vehicles manufactured on or after September 1, 2009 and before September 1, 2010, as specified in S14.8 of this standard. This appendix applies to all vehicles manufactured on or after September 1, 2010.
A. The following car bed, manufactured on or after the date listed, may be used by the National Highway Traffic Safety Administration to test the suppression system of a vehicle that has been certified as being in compliance with 49 CFR 571.208 S19:
Subpart A – Car Bed Child Restraints of Appendix A-1
Manufactured on or after | |
Angel Guard Angel Ride XX2403XXX. | September 25, 2007 |
B. Any of the following rear-facing child restraint systems specified in the table below, manufactured on or after the date listed, may be used by the National Highway Traffic Safety Administration to test the suppression or low risk deployment (LRD) system of a vehicle that has been certified as being in compliance with 49 CFR 571.208 S19. When the restraint system comes equipped with a removable base, the test may be run either with the base attached or without the base.
Subpart B – Rear-Facing Child Restraints of Appendix A-1
Manufactured on or after | |
Century Smart Fit 4543. | December 1, 1999 |
Cosco Arriva 22-013 PAW and base 22-999 WHO | September 25, 2007 |
Evenflo Discovery Adjust Right 212 | December 1, 1999 |
Graco Infant 8457 | December 1, 1999 |
Graco Snugride | September 25, 2007 |
Peg Perego Primo Viaggio SIP IMUNOOUS | September 25, 2007 |
C. Any of the following forward-facing child restraint systems, and forward-facing child restraint systems that also convert to rear-facing, manufactured on or after the date listed, may be used by the National Highway Traffic Safety Administration to test the suppression or LRD system of a vehicle that has been certified as being in compliance with 49 CFR 571.208 S19, or S21. (Note: Any child restraint listed in this subpart that does not have manufacturer instructions for using it in a rear-facing position is excluded from use in testing in a belted rear-facing configuration under S20.2.1.1(a) and S20.4.2):
Manufactured on or after | |
Britax Roundabout E9L02xx | September 25, 2007 |
Craco ComfortSport | September 25, 2007 |
Cosco Touriva 02519 | December 1, 1999 |
Evenflo Tribute V 379xxxx ior Evenflo Tribute 381xxxx | September 25, 2007 |
Evenflo Medallion 254 | December 1, 1999 |
Cosco Summit Deluxe High Back Booster 22-262 | September 25, 2007 |
Evenflo Generations 352xxxx | September 25, 2007 |
Graco Toddler SafeSeat Step 2 | September 25, 2007 |
Graco Platinum Cargo | September 25, 2007 |
Cosco High Back Booster 22-209 | September 25, 2007 |
D. Any of the following forward-facing child restraint systems and belt positioning seats, manufactured on or after the date listed, may be used by the National Highway Traffic Safety Administration as test devices to test the suppression system of a vehicle that has been certified as being in compliance with 49 CFR 571.208 S21 or S23: Subpart D – Forward-Facing Child Restraints and Belt Positioning Seats of Appendix A-1
Manufacture on or after | |
Britax Roadster 9004 | December 1, 1999 |
Graco Platinum Cargo | September 25, 2007 |
Cosco High Back Booster 22-209 | September 25, 2007 |
Evenflo Right Fit 245 | December 1, 1999 |
Evenflo Generations 352xxxx | September 25, 2007 |
Cosco Summit Deluxe High Black Booster 22-262 | September 25, 2007 |
EDITORIAL NOTE: For Federal Register citations affecting §571.208, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.
READ MORESHOW LESS
['CMV Parts and Maintenance']
['Vehicle maintenance']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.