['Air Programs']
['Greenhouse Gases']
05/22/2023
...
For each stack system for which you use the “stack test method” to calculate annual emissions, you must measure the following: | If emissions are detected intermittently, use the following procedures: | If emissions are not detected, use the following procedures: |
---|---|---|
Expected By-products: CF4 C2F6 CHF3 CH2F2 CH3F | Use the measured concentration for “Xksm” in Equation I-18 when available and use one-half of the field detection limit you determined for the fluorinated GHG according to §98.94(j)(2) for the value of “Xksm” when the fluorinated GHG is not detected. | Use one-half of the field detection limit you determined for the fluorinated GHG according to §98.94(j)(2) for the value of “Xksm” in Equation I-18. |
Possible By-products: C3F8 C4F6 c-C4F8 C5F8 | Use the measured concentration for “Xksm” in Equation I-18 when available and use one-half of the field detection limit you determined for the fluorinated GHG according to §98.94(j)(2) for the value of “Xksm” when the fluorinated GHG is not detected. | Assume zero emissions for that fluorinated GHG for the tested stack system. |
[78 FR 68234, Nov. 13, 2013]
['Air Programs']
['Greenhouse Gases']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.