Compliance Just Got Easier: Stay ahead of regulatory changes with instant notifications on updates that matter.

LEARN MORE

FREE TRIAL UPGRADE!
Thank you for investing in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content. Click 'UPGRADE' to continue.
CANCEL
YOU'RE ALL SET!
Enjoy your limited-time access to the Compliance Network!
A confirmation welcome email has been sent to your email address from ComplianceNetwork@t.jjkellercompliancenetwork.com. Please check your spam/junk folder if you can't find it in your inbox.
YOU'RE ALL SET!
Thank you for your interest in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content.
WHOOPS!
You've reached your limit of free access, if you'd like more info, please contact us at 800-327-6868.
CLOSE
 
 

Ontario

Vehicle Weights and Dimensions — For Safe, Productive and Infrastructure-friendly Vehicles

Part III — Preconditions for Designated Vehicles or Designated Combinations

9. (1) Every designated vehicle with a self-steering axle and every designated vehicle combination with a self-steering axle, other than a self-steering tag axle in designated bus or recreational vehicle 1 or 2, must comply with the wheel cut requirements of the Table to this section. O. Reg. 457/10, s. 9.

(2) In this section,

"wheel cut" means the number of degrees the wheels of a self-steering axle are capable of turning in either direction from the straight ahead position. O. Reg. 413/05, s. 9 (2).

TABLE - MINIMUM REQUIRED SELF-STEERING AXLE WHEEL CUT

Distance from Turn Centre to Self-steering AxleMinimum Degrees of Wheel Cut
4.65 metres or less20°
More than 4.65 metres and less than or equal to 5.85 metres25°
More than 5.85 metres and less than or equal to 7.10 metres28°
More than 7.10 metres30°

O. Reg. 413/05, s. 9, Table.

© King's Printer for Ontario, 2012-2021. The text is not the official version of Ontario's Highway Traffic Act or associated regulations. For official text, refer to www.ontario.ca/laws.

['Size and Weight Limits']
['Weights and dimensions']
UPGRADE TO CONTINUE READING