['Enforcement and Audits - OSHA', 'Hazardous Materials Safety - OSHA']
['Oxygen', 'Hydrogen', 'Compressed Gases', 'Enforcement and Audits - OSHA', 'Anhydrous Ammonia']
05/05/2022
...
This standard contains the minimum recommended requirements for pressure relief devices for storage containers constructed in accordance with the ASME or API/ASME codes. It Includes information on the following:
- Application requirements,
- Design and construction requirements, and
- Testing and maintenance of pressure relief devices.
Current edition
- CGA S-1.3-2008 Pressure Relief Device Standards - Part 3 - Stationary Storage Containers for Compressed Gases, 8th Edition
Incorporation by reference
The following editions have been incorporated by reference (IBR) into the Code of Federal Regulations (CFR):
IBR approved for | Overview of requirements | IBR approved edition |
29 CFR 1910.103(c)(1)(iv)(a)(2) | Stationary liquefied hydrogen containers shall be equipped with safety relief devices sized in accordance with CGA Pamphlet S-1, Part 3, Safety Relief Device Standards for Compressed Gas Storage Containers. | CGA S-1.3 (1959) Safety Release Device Standards - Compressed Gas Storage Containers. |
29 CFR 1910.104(b)(6)(iii) | Bulk oxygen storage containers designed and constructed in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessel-1968 shall be equipped with safety relief devices meeting the provisions of the Compressed Gas Association Pamphlet “Safety Relief Device Standards for Compressed Gas Storage Containers,” S-1, Part 3. | CGA S-1.3 (1959) Safety Release Device Standards - Compressed Gas Storage Containers. |
29 CFR 1910.111(d)(4)(ii)(b) | The total relieving capacity of safety relief valves shall be the larger of both the possible refrigeration system upset and the fire exposure determined in accordance with Compressed Gas Association (CGA) S-1, Part 3, Safety Relief Device Standards for Compressed Gas Storage Containers, 1959. | CGA S-1.3 (1959) Safety Release Device Standards - Compressed Gas Storage Containers. |
How to purchase
Standards are available for purchase from the American National Standards Institute (ANSI), see webstore.ansi.org, and from the Compressed Gas Association (CGA), see www.cganet.com.
READ MORESHOW LESS
['Enforcement and Audits - OSHA', 'Hazardous Materials Safety - OSHA']
['Oxygen', 'Hydrogen', 'Compressed Gases', 'Enforcement and Audits - OSHA', 'Anhydrous Ammonia']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.