FREE TRIAL UPGRADE!
Thank you for investing in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content. Click 'UPGRADE' to continue.
CANCEL
YOU'RE ALL SET!
Enjoy your limited-time access to the Compliance Network!
A confirmation welcome email has been sent to your email address from ComplianceNetwork@t.jjkellercompliancenetwork.com. Please check your spam/junk folder if you can't find it in your inbox.
YOU'RE ALL SET!
Thank you for your interest in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content.
WHOOPS!
You've reached your limit of free access, if you'd like more info, please contact us at 800-327-6868.
CLOSE
 
 

...

CGA S-1.1 Pressure relief device standards - Part 1 - Cylinders for compressed gases

RegSenseEnforcement and Audits - OSHAEnforcement and Audits - OSHASafety & HealthGeneral Industry SafetyCompressed GasesHydrogenConsensus StandardsIndustry Consensus StandardHazardous Materials Safety - OSHACompressed Gas Association (CGA)EnglishFocus AreaUSA

This standard covers the requirements for pressure relief devices on cylinders with capacities up to 1000 pounds. It also applies to DOT cylinders for compressed gases. Also included the following information of pressure relief devices:

  • A description of the types,
  • Their limitations,
  • Design considerations,
  • Maintenance,
  • Testing, and
  • Application for various gases.

Current edition

  • CGA S-1.1-2019 Pressure Relief Device Standards - Part 1 - Cylinders for Compressed Gases, 15th Edition

Incorporation by reference

The following editions have been incorporated by reference (IBR) into the Code of Federal Regulations (CFR):

IBR approved for Overview of requirements IBR approved edition
29 CFR 1910.101(c) Compressed gas cylinders, portable tanks, and cargo tanks shall have pressure relief devices installed and maintained in accordance with Compressed Gas Association Pamphlets S-1.1-1963 and 1965 addenda. CGA S-1.1 (1963 and 1965 Addenda) Safety Release Device Standards - Cylinders for Compressed Gases.
29 CFR 1910.103(c)(1)(iv)(a)(2) Portable liquefied hydrogen containers complying with the U.S. Department of Transportation Regulations shall be equipped with safety relief devices as required in the U.S. Department of Transportation Specifications and Regulations. Safety relief devices shall be sized in accordance with the requirements of CGA Pamphlet S-1, Safety Relief Device Standards, Part 1, Compressed Gas Cylinders. CGA S-1.1 (1963 and 1965 Addenda) Safety Release Device Standards - Cylinders for Compressed Gases.

How to purchase

Standards are available for purchase from the American National Standards Institute (ANSI), see webstore.ansi.org, and from the Compressed Gas Association (CGA), see www.cganet.com.

['Enforcement and Audits - OSHA', 'Hazardous Materials Safety - OSHA']
['Hydrogen', 'Compressed Gases', 'Enforcement and Audits - OSHA']
UPGRADE TO CONTINUE READING
Load More