FREE TRIAL UPGRADE!
Thank you for investing in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content. Click 'UPGRADE' to continue.
CANCEL
YOU'RE ALL SET!
Enjoy your limited-time access to the Compliance Network!
A confirmation welcome email has been sent to your email address from ComplianceNetwork@t.jjkellercompliancenetwork.com. Please check your spam/junk folder if you can't find it in your inbox.
YOU'RE ALL SET!
Thank you for your interest in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content.
WHOOPS!
You've reached your limit of free access, if you'd like more info, please contact us at 800-327-6868.
CLOSE
 
 

...

CGA C-8 Standard for requalification of DOT-3HT, CTC-3HT, and TC-3HTM seamless steel cylinders

RegSenseSafety & HealthGeneral Industry SafetyCompressed GasesConsensus StandardsIndustry Consensus StandardHazardous Materials Safety - OSHACompressed Gas Association (CGA)EnglishFocus AreaUSA

This standard provides guidance to those who use cylinders and want to establish their own cylinder inspection procedures and standards. It covers visual inspection requirements and other service life limitation prescribed by Department of Transportation (DOT) regulations.

The standard includes information on the following:

  • Shipping,
  • Retest,
  • Service life,
  • Visual inspection, and
  • Disposition.

Current edition

  • CGA C-8-2017 Standard for Requalification of DOT-3HT, CTC-3HT, and TC-3HTM Seamless Steel Cylinders, 8th Edition

Incorporation by reference

The following editions have been incorporated by reference (IBR) into the Code of Federal Regulations (CFR):

IBR approved for Overview of requirements IBR approved edition
29 CFR 1910.101(a) Each employer shall determine that compressed gas cylinders under his control are in a safe condition to the extent that this can be determined by visual inspection. Visual and other inspections shall be conducted as prescribed in the Hazardous Materials Regulations of the Department of Transportation (49 CFR Parts 171–179 and 14 CFR Part 103). Where those regulations are not applicable, visual and other inspections shall be conducted in accordance with Compressed Gas Association Pamphlet C-8-1962. CGA C-8 (1962) Standard for Requalification of ICC-3HT Cylinders.

How to purchase

Standards are available for purchase from the American National Standards Institute (ANSI), see webstore.ansi.org, and from the Compressed Gas Association (CGA), see www.cganet.com.

['Hazardous Materials Safety - OSHA']
['Compressed Gases']
UPGRADE TO CONTINUE READING
Load More