FREE TRIAL UPGRADE!
Thank you for investing in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content. Click 'UPGRADE' to continue.
CANCEL
YOU'RE ALL SET!
Enjoy your limited-time access to the Compliance Network!
A confirmation welcome email has been sent to your email address from ComplianceNetwork@t.jjkellercompliancenetwork.com. Please check your spam/junk folder if you can't find it in your inbox.
YOU'RE ALL SET!
Thank you for your interest in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content.
WHOOPS!
You've reached your limit of free access, if you'd like more info, please contact us at 800-327-6868.
CLOSE
 
 

...

Calibration devices

RegSenseEnglishFleet SafetyDrug and Alcohol Testing - DOTFocus AreaAgency PublicationCompliance DocsAlcohol testing - Motor CarrierTransportationUSA

NHTSA product lists

Sec. 40.233 requires that external calibration checks be performed on Evidential Breath Testing devices (EBTs). Only calibration devices appearing on the National Highway Traffic Safety Administration’s “Conforming Products List of Calibrating Units for Breath Alcohol Testers” may be used.

The latest list of calibrating units appeared in the June 25, 2007, Federal Register.

Agency Contact:Ms. J. De Carlo Ciccel
Office of Behavioral Safety Research, NTI-130
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
Telephone: (202) 366-1694

Following is the current list of approved calibrating units:

Conforming products list of calibrating units for breath alcohol testers (manufacturer and calibrating unit) 1

1Infra-red (IR) and fuel cell breath testers may be calibrated with either wet bath or dry gas CUs. However, it is inadvisable to use dry gas CUs when calibrating gas chromatograph EBTs.
*Six instruments marked with an asterisk (*) meet the Model Specifications in 49 FR 48864 (December 14, 1984), i.e., instruments tested at 0.050, 0.100, and 0.150. Instruments not marked with an asterisk meet the model specifications detailed in this notice, and were tested at 0.020, 0.040, 0.080, and 0.160 BrAC.
ManufacturersType of device
Dry gasWet bath
1. Airgas, Inc. (Formerly known as: Gateway Airgas, AG Specialty Gas, or Acetylene Gas Co.), St. Louis, MO
Ethanol Breath Alcohol Standard
103 parts per million (ppm)/108 Liters (L)
270 ppm/30L		X
X
X
2. Air Liquide CALGAZ, Cambridge, MD
115 ppm/34L
115 ppm/105L
230 ppm/34L
230 ppm/105L
260.5 ppm/58L
260.5 ppm/537L
260.5 ppm/15L		X
X
X
X
X
X
X
3. CMI, Inc., Owensboro, KY
Toxitest II		X
4. Davtech Analytical Services, Canada
CALWAVE dT-100		X
5. Guth Laboratories, Inc., Harrisburg, PA
Model 34C Simulator (variations: Model 34C Cal DOJ, 34-C-FM, and 34C-NPAS)
Model 3412
Model 10-4 and 10-4D
Model 10-4D Revision A
Model 1214
Model 2100 (formerly Model 210021)
Model 2100 Revision A
590






X
X
X
X
X
X
X
X
6. Intoximeters, Inc., St. Louis, MO
Alco Breath Alcohol Standards*		X
7. Lion Laboratories, Cardiff, Wales, UK (a subsidiary of CMI, Inc.)
AlcoCal Breath Alcohol Standard		X
8. Liquid Technology Corp., Orlando, FL
Ethanol-in-Nitrogen		X
9. Luckey Laboratories, Inc., San Bernardino, CA
Simulator*		X
10. National Draeger, Inc., Durango, CO
Mark II-A
Alcotest CU 34
X
X
11. PLD of Florida, Inc., Rockledge, FL
BA 500		X
12. Protection Devices, Inc., U.S. Alcohol Testing, Inc., Rancho Cucamonga, CA
LS34 Model 6100*		X
13. RepCo Marketing, Inc., Raleigh, NC
AS-1
Model 3402C
Model 3402C-2K

X
X
X
14. Scott Specialty Gases, Inc., Plumsteadville, PA
Model EBS™ Gaseous Ethanol Breath Standard
Scotty 28 0.040 BAC/28L
Scotty 28 0.045 BAC/28L
Scotty 28 0.080 BAC/28L
Scotty 28 0.100 BAC/28L
Scotty 28 0.105 BAC/28L		X
X
X
X
X
X
15. Smith & Wesson Electronic Co., Springfield, MA
Mark II-A Simulator*		X
16. Systems Innovation, Inc., Hallstead, PA
True-Test MD 901*		X
17. U.S. Alcohol Testing, Rancho Cucamonga, CA
Alco-Simulator 2000*
Alco-Simulator 61000
X
X
['Drug and Alcohol Testing - DOT']
['Alcohol testing - Motor Carrier']
UPGRADE TO CONTINUE READING
Load More