FREE TRIAL UPGRADE!
Thank you for investing in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content. Click 'UPGRADE' to continue.
CANCEL
YOU'RE ALL SET!
Enjoy your limited-time access to the Compliance Network!
A confirmation welcome email has been sent to your email address from ComplianceNetwork@t.jjkellercompliancenetwork.com. Please check your spam/junk folder if you can't find it in your inbox.
YOU'RE ALL SET!
Thank you for your interest in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content.
WHOOPS!
You've reached your limit of free access, if you'd like more info, please contact us at 800-327-6868.
CLOSE
 
 

...

ANSI Z21.30 Requirements for gas appliances and gas piping installations

RegSenseEnforcement and Audits - OSHAEnforcement and Audits - OSHASawmillsSafety & HealthGeneral Industry SafetyAmerican National Standards Institute (ANSI)Specialized IndustriesConsensus StandardsIndustry Consensus StandardEnglishFocus AreaUSA

This standard covers gas appliances and gas piping installations for fuel gases, such as natural and manufactured gas. It looks at design, fabrication, installation, tests, and operation of these systems. Among other things, the standard requires that the gas be turned off when installation is being performed, burners be turned off before gas to the premises is turned off, and matches or sources of ignition can NOT be used to check for gas leaks (use soap and water solution or other acceptable material instead).

Current edition

  • ANSI Z21.30-1964 Requirements for Gas Appliances and Gas Piping Installations (Cancelled)

Incorporation by reference

The following editions have been incorporated by reference (IBR) into the Code of Federal Regulations (CFR):

IBR approved for Overview of requirements IBR approved edition
1ANSI Z21.30 was cancelled in 1964 and replaced by NFPA 54 (ANSI Z223.1).
29 CFR 1910.265(c)(15) Employers must ensure all gas piping and appliances are installed in accordance with the American National Standard Requirements for the Installation of Gas Appliances and Gas Piping Z21.30-1964. ANSI Z21.30-1964 Requirements for Gas Appliances and Gas Piping Installations.1

How to purchase

Standards are available for purchase from the American National Standards Institute (ANSI), see webstore.ansi.org.

['Enforcement and Audits - OSHA', 'Specialized Industries']
['Sawmills', 'Enforcement and Audits - OSHA']
UPGRADE TO CONTINUE READING
Load More