['Air Programs']
['Greenhouse Gases']
05/22/2023
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
A complete record of all measured parameters used in the GHG emissions calculations is required. Therefore, whenever a quality-assured value of a required parameter is unavailable (e.g., if a meter malfunctions during unit operation or if a required sample measurement is not taken), a substitute data value for the missing parameter shall be used in the calculations, according to the following requirements:
(a) Where anode or paste consumption data are missing, CO2 emissions can be estimated from aluminum production by using Equation F-9 of this section.
Where:
ECO2 = CO2 emissions from anode and/or paste consumption, metric tons CO2.
EFp = Prebake technology specific emission factor (1.6 metric tons CO2/metric ton aluminum produced).
MPp = Metal production from prebake process (metric tons Al).
EFs = Søderberg technology specific emission factor (1.7 metric tons CO2/metric ton Al produced).
MPs = Metal production from Søderberg process (metric tons Al).
(b) For other parameters, use the average of the two most recent data points after the missing data.
[74 FR 56415, Oct. 30, 2009; 75 FR 79156, Dec. 17, 2010; 81 FR 89253, Dec. 9, 2016]
['Air Programs']
['Greenhouse Gases']