Compliance Just Got Easier: Stay ahead of regulatory changes with instant notifications on updates that matter.
['Personal Protective Equipment']
['Respiratory Protection']
10/07/2026
§84.143 Terminal fittings or chambers; Type B supplied-air respirators; minimum requirements.
(a) Blowers or connections to air supplies providing positive pressures shall not be approved for use on Type B supplied-air respirators.
(b) Terminal fittings or chambers employed in Type B supplied-air respirators, shall be:
(1) Installed in the inlet of the hose.
(2) Designed and constructed to provide for the drawing of air through corrosion resistant material arranged so as to be capable of removing material larger than 0.149 mm. in diameter (149 micrometers, 100-mesh, U.S. Standard sieve).
(3) Installed to provide a means for fastening or anchoring the fitting or chamber in a fixed position in a zone of respirable air.
['Personal Protective Equipment']
['Respiratory Protection']
UPGRADE TO CONTINUE READING
ezExplanations
Results Aided by AI
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2026 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
