[]
[]
08/08/2023
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved incorporation by reference (IBR) material is available for inspection at U.S. EPA and at the National Archives and Records Administration (NARA). Contact U.S. EPA at: U.S. EPA, Air and Radiation Docket and Information Center, WJC West Building, Room 3334, 1301 Constitution Ave. NW, Washington, DC 20460; (202) 566–1742. For information on the availability of this material at NARA, visit: www.archives.gov/federal-register/cfr/ibr-locations.html or email fr.inspection@nara.gov. The material may be obtained from the following sources:
(a) American Petroleum Institute (API), 200 Massachusetts Avenue NW, Suite 1100, Washington, DC 20001–5571; (202) 682–8000; www.api.org.
(1) API MPMS 14.1–2016, Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluids Measurement Section 1—Collecting and Handling of Natural Gas Samples for Custody Transfer, 7th Edition, May 2016 (“API MPMS 14.1”); IBR approved for §80.155(b).
(2) API MPMS 14.3.1–2012, Manual of Petroleum Measurement Standards Chapter 14.3.1—Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square?edged Orifice Meters Part 1: General Equations and Uncertainty Guidelines, 4th Edition, including Errata July 2013, Reaffirmed, July 2022 (“API MPMS 14.3.1”); IBR approved for §80.155(a).
(3) API MPMS 14.3.2–2016, Manual of Petroleum Measurement Standards Chapter 14.3.2—Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square?edged Orifice Meters Part 2: Specification and Installation Requirements, 5th Edition, March 2016 (“API MPMS 14.3.2”); IBR approved for §80.155(a).
(4) API MPMS 14.3.3–2013, Manual of Petroleum Measurement Standards Chapter 14.3.3—Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square?edged Orifice Meters Part 3: Natural Gas Applications, 4th Edition, Reaffirmed, June 2021 (“API MPMS 14.3.3”); IBR approved for §80.155(a).
(5) API MPMS 14.3.4–2019, Manual of Petroleum Measurement Standards Chapter 14.3.4—Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square?edged Orifice Meters Part 4—Background, Development, Implementation Procedure, and Example Calculations, 4th Edition, October 2019 (“API MPMS 14.3.4”); IBR approved for §80.155(a).
(6) API MPMS 14.12–2017, Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluid Measurement Section 12—Measurement of Gas by Vortex Meters, 1st Edition, March 2017 (“API MPMS 14.12”); IBR approved for §80.155(a).
Note 1 to paragraph (a):
API MPMS 14.3.1, 14.3.2, 14.3.3, and 141.3.4, are co-published as AGA Report 3, Parts 1, 2, 3, and 4, respectively.
(b) American Public Health Association (APHA), 1015 15th Street NW, Washington, DC 20005; (202) 777–2742; www.standardmethods.org.
(1) SM 2540, revised June 10, 2020; IBR approved for §80.155(c).
(2) [Reserved]
(c) ASTM International (ASTM), 100 Barr Harbor Dr., P.O. Box C700, West Conshohocken, PA 19428–2959; (877) 909–2786; www.astm.org.
(1) ASTM D975–21, Standard Specification for Diesel Fuel, approved August 1, 2021 (“ASTM D975”); IBR approved for §§80.2; 80.1426(f); 80.1450(b); 80.1451(b); 80.1454(l).
(2) ASTM D1250–19e1, Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1, approved May 1, 2019 (“ASTM D1250”); IBR approved for §80.1426(f).
(3) ASTM D3588–98 (Reapproved 2017)e1, Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels, approved April 1, 2017 (“ASTM D3588”); IBR approved for §80.155(b) and (f).
(4) ASTM D4057–12, Standard Practice for Manual Sampling of Petroleum and Petroleum Products, approved December 1, 2012 (“ASTM D4057”); IBR approved for §80.8(a).
(5) ASTM D4177–95 (Reapproved 2010), Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, approved May 1, 2010 (“ASTM D4177”); IBR approved for §80.8(b).
(6) ASTM D4442–20, Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials, approved March 1, 2020 (“ASTM D4442”); IBR approved for §80.1426(f).
(7) ASTM D4444–13 (Reapproved 2018), Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters, reapproved July 1, 2018 (“ASTM D4444”); IBR approved for §80.1426(f).
(8) ASTM D4888–20, Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes, approved December 15, 2020 (“ASTM D4888”); IBR approved for §80.155(b).
(9) ASTM D5504–20, Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence, approved November 1, 2020 (“ASTM D5504”); IBR approved for §80.155(b).
(10) ASTM D5842–14, Standard Practice for Sampling and Handling of Fuels for Volatility Measurement, approved January 15, 2014 (“ASTM D5842”); IBR approved for §80.8(c).
(11) ASTM D5854–96 (Reapproved 2010), Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products, approved May 1, 2010 (“ASTM D5854”); IBR approved for §80.8(d).
(12) ASTM D6751–20a, Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels, approved August 1, 2020 (“ASTM D6751”); IBR approved for §80.2.
(13) ASTM D6866–22, Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis, approved March 15, 2022 (“ASTM D6866”); IBR approved for §§80.155(b); 80.1426(f); 80.1430(e).
(14) ASTM D7164–21, Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography, approved April 1, 2021 (“ASTM D716s4”); IBR approved for §80.155(a).
(15) ASTM D8230–19, Standard Test Method for Measurement of Volatile Silicon-Containing Compounds in a Gaseous Fuel Sample Using Gas Chromatography with Spectroscopic Detection, approved June 1, 2019 (“ASTM D8230”); IBR approved for §80.155(b).
(16) ASTM E711–87 (Reapproved 2004), Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter, reapproved 2004 (“ASTM E711”); IBR approved for §80.1426(f).
(17) ASTM E870–82 (Reapproved 2019), Standard Test Methods for Analysis of Wood Fuels, reapproved April 1, 2019 (“ASTM E870”); IBR approved for §80.1426(f).
(d) European Committee for Standardization (CEN), Rue de la Science 23, B–1040 Brussels, Belgium; 32 2 550 08 11; www.cencenelec.eu.
(1) EN 17526:2021(E), Gas meter—Thermal-mass flow-meter based gas meter, approved July 11, 2021 (“EN 17526”); IBR approved for §80.155(a).
(2) [Reserved]
[88 FR 44563, July 12, 2023]
READ MORESHOW LESS
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.