['Water Programs']
['Point Sources']
02/24/2022
...
Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
Pollutant parameter waste source | Maximum for any 1 day | Average of values for 30 consecutive days shall not exceed | Residual chlorine minimum for any 1 day |
---|---|---|---|
1 No discharge of free oil. See �435.41(y). 2 Minimum of 1 mg/l and maintained as close to this concentration as possible. 3 There shall be no floating solids as a result of the discharge of these wastes. | |||
Produced water | 72 | 48 | NA |
Deck drainage | ( 1) | ( 1) | NA |
Water-based: | |||
Drilling fluids | ( 1) | ( 1) | NA |
Drill Cuttings | ( 1) | ( 1) | NA |
Non-aqueous: | |||
Drilling fluids | No discharge | No discharge | NA |
Drill Cuttings | ( 1) | ( 1) | NA |
Well treatment, workover, and completion fluids | ( 1) | ( 1) | NA |
Sanitary: | |||
M10 | NA | NA | 2 1 |
M9IM 3 | NA | NA | NA |
Domestic 3 | NA | NA | NA |
Produced sand | Zero discharge | Zero discharge | NA |
[61 FR 66125, Dec. 16, 1996, as amended at 66 FR 6916, Jan. 22, 2001; 77 FR 29846, May 18, 2012]
READ MORESHOW LESS
['Water Programs']
['Point Sources']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2025 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.