['Water Programs']
['Industrial Wastewater', 'Toxic Water Pollutants', 'Point Sources', 'Total Maximum Daily Loads']
10/18/2024
...
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
Effluent characteristic | Effluent limitations | |
---|---|---|
Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed - | |
1 Within the range 6.0 to 9.0. | ||
Metric units (kg/kkg of raw material) | ||
TSS | 0.096 | 0.064 |
Oil and grease | 0.024 | .016 |
pH | (1) | (1) |
English units (lb/1,000 lb of raw material) | ||
TSS | 0.096 | 0.064 |
Oil and grease | 0.024 | .016 |
pH | (1) | (1) |
(b) All plants constructed before 1959 shall employ the best available maintenance and housekeeping practices in order to minimize the discharge of oil and grease in nonprocess waste waters. The concentration of oil and grease in discharges of nonprocess waste waters shall meet the following limitations:
(1) The average of daily values for 30 consecutive days shall not exceed 5 mg/l.
(2) The maximum for any one day shall not exceed 10 mg/l.
[39 FR 6662, Feb. 21, 1974; 39 FR 26423, July 19, 1974, as amended at 40 FR 18173, Apr. 25, 1975]
READ MORESHOW LESS
['Water Programs']
['Industrial Wastewater', 'Toxic Water Pollutants', 'Point Sources', 'Total Maximum Daily Loads']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.