['Air Programs']
['Hazardous Air Pollutants']
12/23/2024
...
As stated in §63.8790(a), you must comply with the emission limits in the following table:
For . . . | You must . . . |
---|---|
1. Each existing, new, or reconstructed loop slitter adhesive use affected source | Not use any HAP-based adhesives. |
2. Each new or reconstructed flame lamination affected source | Reduce HAP emissions by 90 percent. |
3. Each existing flame lamination affected source | Emit no more than 1.45 pounds per hour of HCl per flame lamination line. |
[86 FR 64399, Nov. 18, 2021]
['Air Programs']
['Hazardous Air Pollutants']
UPGRADE TO CONTINUE READING
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2025 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.