FREE TRIAL UPGRADE!
Thank you for investing in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content. Click 'UPGRADE' to continue.
CANCEL
YOU'RE ALL SET!
Enjoy your limited-time access to the Compliance Network!
A confirmation welcome email has been sent to your email address from ComplianceNetwork@t.jjkellercompliancenetwork.com. Please check your spam/junk folder if you can't find it in your inbox.
YOU'RE ALL SET!
Thank you for your interest in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content.
WHOOPS!
You've reached your limit of free access, if you'd like more info, please contact us at 800-327-6868.
CLOSE
 
 

...

For the following existing sources . . . You must meet the emission limits for the specified pollutant . . .
Total fluorides Total particulate Mercury
a The existing source compliance data is June 10, 2002, except as noted.
b ?During periods of startup and shutdown, for emission limits stated in terms of pounds of pollutant per ton of feed, you are subject to the work practice standards specified in §63.602(f).
c ?Beginning on August 19, 2018, you must include oxidation reactors in superphosphoric acid process lines when determining compliance with the total fluorides limit.
d ?Compliance date is August 19, 2015.
e?Compliance date November 3, 2020.
Wet-Process Phosphoric Acid Line 0.020 lb/ton of equivalent P2O5 feed
Superphosphoric Acid Process Line? 0.010 lb/ton of equivalent P2O5 feed
Superphosphoric Acid Process Line with a Submerged Combustion Process 0.20 lb/ton of equivalent P2O5 feed
Phosphate Rock Dryer 0.2150 lb/ton of phosphate rock feed
Phosphate Rock Calciner 9.0E-04 lb/ton of rock feed? 0.181 g/dscm 0.23 mg/dscm corrected to 3-percent oxygen?e

[80 FR 50436, Aug. 19, 2015, as amended at 82 FR 45199, Sept. 28, 2017; 85 FR 69512, Nov. 3, 2020 ]

['Air Programs']
['Hazardous Air Pollutants']
Load More