3. The allowance is not intended to reimburse the grantee for costs actually incurred for facilities planning or design. Rather, the allowance is intended to assist in defraying those costs. Under this procedure, questions of equity (i.e., reimbursement on a dollar-for-dollar basis) will not be appropriate.
4. The estimated and final allowance will be determined in accordance with this appendix and tables 1, 2 and 3. Table 2 is to be used in the event the grantee received a grant for facilities planning. Table 3 is to be used to determine the facilities planning allowance for a Step 7 grant if the grantee did not receive a Step 1 grant. The amount of the allowance is computed by applying the resulting allowance percentage to the initial allowable building cost.
5. The initial allowable building cost is the initial allowable cost of erecting, altering, remodeling, improving, or extending a treatment works, whether accomplished through subagreement or force account. Specifically, the initial allowable building cost is the allowable cost of the following:
a. The initial award amount of all prime subagreements for building the project.
b. The initial amounts approved for force account work performed in lieu of awarding a subagreement for building the project.
c. The purchase price of eligible real property.
6. The estimated allowance is to be based on the estimate of the initial allowable building cost.
7. The final allowance will be determined one time only for each project, based on the initial allowable building cost, and will not be adjusted for subsequent cost increases or decreases.
8. For a Step 3 or Step 7 project, the grantee may request payment of 50 percent of the Federal share of the estimated allowance immediately after grant award. Final payment of the Federal share of the allowance may be requested in the first payment after the grantee has awarded all prime subagreements for building the project, received the Regional Administrator's approval for force account work, and completed the acquisition of all eligible real property.
9. For a Step 2 + 3 project, if the grantee has not received a grant for facilities planning, the grantee may request payment of 30 percent of the Federal share of the estimated allowance immediately after the grant award. Half of the remaining estimated allowance may be requested when design of the project is 50 percent complete. If the grantee has received a grant for facilities planning, the grantee may request half of the Federal share of the estimated allowance when design of the project is 50 percent complete. Final payment of the Federal share of the allowance may be requested in the first payment after the grantee has awarded all prime subagreements for building the project, received the Regional Administrator's approval for force account work, and completed the acquisition of all eligible real property.
10. The allowance does not include architect or engineering services provided during the building of the project, e.g., reviewing bids, checking shop drawings, reviewing change orders, making periodic visits to job sites, etc. Architect or engineering services during the building of the project are allowable costs subject to this regulation and 40 CFR
part 33.
11. The State will determine the amount and conditions of any advance under
§35.2025(b), not to exceed the Federal share of the estimated allowance.
12. EPA will reduce the Federal share of the allowance by the amount of any advances the grantee received under
§35.2025(b).
Table 1 - Allowance for Facilities Planning and Design| Building cost | Allowance as a percentage of building cost* |
|---|
| $100,000 or less | 14.4945 |
| 120,000 | 14.1146 |
| 150,000 | 13.6631 |
| 175,000 | 13.3597 |
| 200,000 | 13.1023 |
| 250,000 | 12.6832 |
| 300,000 | 12.3507 |
| 350,000 | 12.0764 |
| 400,000 | 11.8438 |
| 500,000 | 11.4649 |
| 600,000 | 11.1644 |
| 700,000 | 10.9165 |
| 800,000 | 10.7062 |
| 900,000 | 10.5240 |
| 1,000,000 | 10.3637 |
| 1,200,000 | 10.0920 |
| 1,500,000 | 9.7692 |
| 1,750,000 | 9.5523 |
| 2,000,000 | 9.3682 |
| 2,500,000 | 9.0686 |
| 3,000,000 | 8.8309 |
| 3,500,000 | 8.6348 |
| 4,000,000 | 8.4684 |
| 5,000,000 | 8.1975 |
| 6,000,000 | 7.9827 |
| 7,000,000 | 7.8054 |
| 8,000,000 | 7.6550 |
| 9,000,000 | 7.5248 |
| 10,000,000 | 7.4101 |
| 12,000,000 | 7.2159 |
| 15,000,000 | 6.9851 |
| 17,500,000 | 6.8300 |
| 20,000,000 | 6.6984 |
| 25,000,000 | 6.4841 |
| 30,000,000 | 6.3142 |
| 35,000,000 | 6.1739 |
| 40,000,000 | 6.0550 |
| 50,000,000 | 5.8613 |
| 60,000,000 | 5.7077 |
| 70,000,000 | 5.5809 |
| 80,000,000 | 5.4734 |
| 90,000,000 | 5.3803 |
| 100,000,000 | 5.2983 |
| 120,000,000 | 5.1594 |
| 150,000,000 | 4.9944 |
| 175,000,000 | 4.8835 |
| 200,000,000 | 4.7894 |
Note: The allowance does not reimburse for costs incurred. Accordingly, the allowance tables shall not be used to determine the compensation for facilities planning or design services. The compensation for facilities planning or design services should be based upon the nature, scope and complexity of the services required by the community.
*Interpolate between values. |
Table 2 - Allowance for Design Only| Building cost | Allowance as a percentage of building cost* |
|---|
| $100,000 or less | 8.5683 |
| 120,000 | 8.3808 |
| 150,000 | 8.1570 |
| 175,000 | 8.0059 |
| 200,000 | 7.8772 |
| 250,000 | 7.6668 |
| 300,000 | 7.4991 |
| 350,000 | 7.3602 |
| 400,000 | 7.2419 |
| 500,000 | 7.0485 |
| 600,000 | 6.8943 |
| 700,000 | 6.7666 |
| 800,000 | 6.6578 |
| 900,000 | 6.5634 |
| 1,000,000 | 6.4300 |
| 1,200,000 | 6.3383 |
| 1,500,000 | 6.1690 |
| 1,750,000 | 6.0547 |
| 2,000,000 | 5.9574 |
| 2,500,000 | 5.7983 |
| 3,000,000 | 5.6714 |
| 3,500,000 | 5.5664 |
| 4,000,000 | 5.4769 |
| 5,000,000 | 5.3306 |
| 6,000,000 | 5.2140 |
| 7,000,000 | 5.1174 |
| 8,000,000 | 5.0352 |
| 9,000,000 | 4.9637 |
| 10,000,000 | 4.9007 |
| 12,000,000 | 4.7935 |
| 15,000,000 | 4.6655 |
| 17,500,000 | 4.5790 |
| 20,000,000 | 4.5054 |
| 25,000,000 | 4.3851 |
| 30,000,000 | 4.2892 |
| 35,000,000 | 4.2097 |
| 40,000,000 | 4.1421 |
| 50,000,000 | 4.0314 |
| 60,000,000 | 3.9432 |
| 70,000,000 | 3.8702 |
| 80,000,000 | 3.8080 |
| 90,000,000 | 3.7540 |
| 100,000,000 | 3.7063 |
| 120,000,000 | 3.6252 |
| 150,000,000 | 3.5284 |
| 175,000,000 | 3.4630 |
| 200,000,000 | 3.4074 |
Note: The allowance does not reimburse for costs incurred. Accordingly, the allowance tables shall not be used to determine the compensation for facilities planning or design services. The compensation for facilities planning or design services should be based upon the nature, scope and complexity of the services required by the community.
*Interpolate between values. |
Table 3 - Allowance for Facilities Planning for Design/Build Projects| Building cost (dollars) | Allowance as a percentage of building cost* |
|---|
| 100,000 or less | 5.9262 |
| 120,000 | 5.7337 |
| 150,000 | 5.5061 |
| 175,000 | 5.3538 |
| 200,000 | 5.2250 |
| 250,000 | 5.0163 |
| 300,000 | 4.8516 |
| 350,000 | 4.7162 |
| 400,000 | 4.6019 |
| 500,000 | 4.4164 |
| 600,000 | 4.2701 |
| 700,000 | 4.1499 |
| 800,000 | 4.0483 |
| 900,000 | 3.9606 |
| 1,000,000 | 3.8837 |
| 1,200,000 | 3.7538 |
| 1,500,000 | 3.6003 |
| 1,750,000 | 3.4976 |
| 2,000,000 | 3.4109 |
| 2,500,000 | 3.2703 |
| 3,000,000 | 3.1595 |
| 3,500,000 | 3.0684 |
| 4,000,000 | 2.9915 |
| 5,000,000 | 2.8669 |
| 6,000,000 | 2.7686 |
| 7,000,000 | 2.6880 |
| 8,000,000 | 2.6198 |
Note: Building cost is the sum of the allowable cost of (1) the initial award amount of the prime subagreement for building and designing the project; and (2) the purchase price of eligible real property.
*Interpolate between values. |
[49 FR 6234, Feb. 17, 1984, as amended at 55 FR 27098, June 29, 1990]
