['Air Programs']
['Air Emissions']
03/22/2023
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
(a) The following duty cycles apply for constant-speed engines:
(1) The following duty cycle applies for discrete-mode testing:
| D2 mode number | Engine speed | Torque (percent) 1 | Weighting factors |
|---|---|---|---|
| 1 | Engine governed | 100 | 0.05 |
| 2 | Engine governed | 75 | 0.25 |
| 3 | Engine governed | 50 | 0.30 |
| 4 | Engine governed | 25 | 0.30 |
| 5 | Engine governed | 10 | 0.10 |
| 1 The percent torque is relative to maximum test torque. | |||
(2) The following duty cycle applies for ramped-modal testing:
| RMC mode | Time in mode (seconds) | Engine speed | Torque (percent) 1 2 |
|---|---|---|---|
| 1a Steady-state | 53 | Engine governed | 100. |
| 1b Transition | 20 | Engine governed | Linear transition. |
| 2a Steady-state | 101 | Engine governed | 10. |
| 2b Transition | 20 | Engine governed | Linear transition. |
| 3a Steady-state | 277 | Engine governed | 75. |
| 3b Transition | 20 | Engine governed | Linear transition. |
| 4a Steady-state | 339 | Engine governed | 25. |
| 4b Transition | 20 | Engine governed | Linear transition. |
| 5 Steady-state | 350 | Engine governed | 50. |
| 1 The percent torque is relative to maximum test torque. 2 Advance from one mode to the next within a 20-second transition phase. During the transition phase, command a linear progression from the torque setting of the current mode to the torque setting of the next mode. | |||
(b) The following duty cycles apply for variable-speed engines with maximum engine power below 19 kW:
(1) The following duty cycle applies for discrete-mode testing:
| G2 mode number | Engine speed 1 | Torque (percent) 2 | Weighting factors |
|---|---|---|---|
| 1 | Maximum test speed | 100 | 0.09 |
| 2 | Maximum test speed | 75 | 0.20 |
| 3 | Maximum test speed | 50 | 0.29 |
| 4 | Maximum test speed | 25 | 0.30 |
| 5 | Maximum test speed | 10 | 0.07 |
| 6 | Warm idle | 0 | 0.05 |
| 1 Speed terms are defined in 40 CFR part 1065. 2 The percent torque is relative to the maximum torque at the commanded test speed. | |||
(2) The following duty cycle applies for ramped-modal testing:
| RMC mode | Time in mode (seconds) | Engine speed 1 3 | Torque (percent) 2 3 |
|---|---|---|---|
| 1a Steady-state | 41 | Warm idle | 0. |
| 1b Transition | 20 | Linear transition | Linear transition. |
| 2a Steady-state | 135 | Maximum test speed | 100. |
| 2b Transition | 20 | Maximum test speed | Linear transition. |
| 3a Steady-state | 112 | Maximum test speed | 10. |
| 3b Transition | 20 | Maximum test speed | Linear transition. |
| 4a Steady-state | 337 | Maximum test speed | 75. |
| 4b Transition | 20 | Maximum test speed | Linear transition. |
| 5a Steady-state | 518 | Maximum test speed | 25. |
| 5b Transition | 20 | Maximum test speed | Linear transition. |
| 6a Steady-state | 494 | Maximum test speed | 50. |
| 6b Transition | 20 | Linear transition | Linear transition. |
| 7 Steady-state | 43 | Warm idle | 0. |
| 1 Speed terms are defined in 40 CFR part 1065. 2 The percent torque is relative to the maximum torque at the commanded engine speed. 3 Advance from one mode to the next within a 20-second transition phase. During the transition phase, command a linear progression from the torque setting of the current mode to the torque setting of the next mode, and simultaneously command a similar linear progression for engine speed if there is a change in speed setting. | |||
(c) The following duty cycles apply for variable-speed engines with maximum engine power at or above 19 kW:
(1) The following duty cycle applies for discrete-mode testing:
| C1 mode number | Engine speed 1 | Torque (percent) 2 | Weighting factors |
|---|---|---|---|
| 1 | Maximum test speed | 100 | 0.15 |
| 2 | Maximum test speed | 75 | 0.15 |
| 3 | Maximum test speed | 50 | 0.15 |
| 4 | Maximum test speed | 10 | 0.10 |
| 5 | Intermediate test speed | 100 | 0.10 |
| 6 | Intermediate test speed | 75 | 0.10 |
| 7 | Intermediate test speed | 50 | 0.10 |
| 8 | Warm idle | 0 | 0.15 |
| 1 Speed terms are defined in 40 CFR part 1065. 2 The percent torque is relative to the maximum torque at the commanded test speed. | |||
(2) The following duty cycle applies for ramped-modal testing:
| RMC mode | Time in mode (seconds) | Engine speed 1 3 | Torque (percent) 2 3 |
|---|---|---|---|
| 1a Steady-state | 126 | Warm Idle | 0. |
| 1b Transition | 20 | Linear Transition | Linear Transition. |
| 2a Steady-state | 159 | Intermediate Speed | 100. |
| 2b Transition | 20 | Intermediate Speed | Linear Transition. |
| 3a Steady-state | 160 | Intermediate Speed | 50. |
| 3b Transition | 20 | Intermediate Speed | Linear Transition. |
| 4a Steady-state | 162 | Intermediate Speed | 75. |
| 4b Transition | 20 | Linear Transition | Linear Transition. |
| 5a Steady-state | 246 | Maximum Test Speed | 100. |
| 5b Transition | 20 | Maximum Test Speed | Linear Transition. |
| 6a Steady-state | 164 | Maximum Test Speed | 10. |
| 6b Transition | 20 | Maximum Test Speed | Linear Transition. |
| 7a Steady-state | 248 | Maximum Test Speed | 75. |
| 7b Transition | 20 | Maximum Test Speed | Linear Transition. |
| 8a Steady-state | 247 | Maximum Test Speed | 50. |
| 8b Transition | 20 | Linear Transition | Linear Transition. |
| 9 Steady-state | 128 | Warm Idle | 0. |
| 1 Speed terms are defined in 40 CFR part 1065. 2 The percent torque is relative to the maximum torque at the commanded engine speed. 3 Advance from one mode to the next within a 20-second transition phase. During the transition phase, command a linear progression from the torque setting of the current mode to the torque setting of the next mode, and simultaneously command a similar linear progression for engine speed if there is a change in speed setting. | |||
[69 FR 39213, June 29, 2004, as amended at 73 FR 37241, June 30, 2008]
READ MORESHOW LESS
['Air Programs']
['Air Emissions']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.