['Dangerous goods']
['Placarding - Dangerous Goods']
06/25/2024
...
4.15.3 A placard, or a placard and UN number, must be displayed on each side and on each end of a large means of containment, except that
(a) in the case of a large means of containment that is permanently connected to a frame, such as a truck frame or a supporting frame for the means of containment, the placard, or the placard and UN number, may be displayed on the frame if the resulting position of the placard, or the placard and UN number, is equivalent on each side and on each end of the means of containment;
(b) in the case of a large means of containment that is a trailer unit, the placard, or the placard and UN number, may be displayed on the front of the vehicle that is attached to the trailer unit rather than on the leading end of the trailer unit; and
(c) in the case of a large means of containment that is an intermediate bulk container (IBC) with a capacity greater than 450 L but less than or equal to 3 000 L,
(i) a placard and UN number may be displayed on two opposite sides of the IBC, or
(ii) a label for each primary and subsidiary class as well as a UN number and a shipping name may be displayed on two opposite sides of the IBC.
SOR/2014-159, s. 18
READ MORESHOW LESS
['Dangerous goods']
['Placarding - Dangerous Goods']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.