['Waste']
['Solid Waste', 'Incompatible Wastes', 'Waste Management', 'TSD Facilities', 'Hazardous Waste']
11/08/2023
...
(a) Incompatible wastes, or incompatible wastes and materials (see Appendix V for examples), must not be placed in the same container, unless §264.17(b) is complied with.
(b) Hazardous waste must not be placed in an unwashed container that previously held an incompatible waste or material.
[Comment: As required by §264.13 , the waste analysis plan must include analyses needed to comply with §264.177 . Also, §264.17(c) requires wastes analyses, trial tests or other documentation to assure compliance with §264.17(b) . As required by §264.73 , the owner or operator must place the results of each waste analysis and trial test, and any documented information, in the operating record of the facility.]
(c) A storage container holding a hazardous waste that is incompatible with any waste or other materials stored nearby in other containers, piles, open tanks, or surface impoundments must be separated from the other materials or protected from them by means of a dike, berm, wall, or other device.
[Comment: The purpose of this section is to prevent fires, explosions, gaseous emission, leaching, or other discharge of hazardous waste or hazardous waste constituents which could result from the mixing of incompatible wastes or materials if containers break or leak.]
READ MORESHOW LESS
['Waste']
['Solid Waste', 'Incompatible Wastes', 'Waste Management', 'TSD Facilities', 'Hazardous Waste']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.