Compliance Just Got Easier: Stay ahead of regulatory changes with instant notifications on updates that matter.
['Walking Working Surfaces']
['Walking Working Surfaces']
09/05/2023
The following training provisions clarify the requirements of �1926.21(b)(2), regarding the hazards addressed in subpart X.
(a) The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards.
(1) The employer shall ensure that each employee has been trained by a competent person in the following areas, as applicable:
(i) The nature of fall hazards in the work area;
(ii) The correct procedures for erecting, maintaining, and disassembling thefall protection systems to be used;
(iii) The proper construction, use, placement, and care in handling of all stairways and ladders;
(iv) The maximum intended load-carrying capacities of ladders used; and
(v) The standards contained in this subpart.
(b) Retraining shall be provided for each employee as necessary so that the employee maintains the understanding and knowledge acquired through compliance with this section.
['Walking Working Surfaces']
['Walking Working Surfaces']
UPGRADE TO CONTINUE READING
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2026 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
