Compliance Just Got Easier: Stay ahead of regulatory changes with instant notifications on updates that matter.

LEARN MORE

FREE TRIAL UPGRADE!
Thank you for investing in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content. Click 'UPGRADE' to continue.
CANCEL
YOU'RE ALL SET!
Enjoy your limited-time access to the Compliance Network!
A confirmation welcome email has been sent to your email address from ComplianceNetwork@t.jjkellercompliancenetwork.com. Please check your spam/junk folder if you can't find it in your inbox.
YOU'RE ALL SET!
Thank you for your interest in EnvironmentalHazmatHuman ResourcesHuman Resources, Hazmat & Environmental related content.
WHOOPS!
You've reached your limit of free access, if you'd like more info, please contact us at 800-327-6868.
CLOSE
 
 

§1910.101 Compressed gases (general requirements).

RegSenseProcess Safety ManagementDipping and CoatingHAZWOPERFlammable LiquidsHazardous Waste Cleanup OperationsCompressed GasesOccupational Safety and Health Administration (OSHA), DOLToxic and Hazardous Substances - OSHACFR SectionHAZWOPERUSALiquefied Petroleum GasesEnglishAnhydrous AmmoniaHazardous Materials Safety - OSHASpraying/Spray FinishingHAZWOPER Emergency ResponseSafety & HealthCFR RegulationsGeneral Industry SafetyToxic and Hazardous Substances - OSHAHazardous Waste Treatment, Storage, and/or DisposalHydrogenSpecialized IndustriesHazardous Materials Safety - OSHAFocus AreaOxygenExplosives and Blasting

(a) Inspection of compressed gas cylinders. Each employer shall determine that compressed gas cylinders under his control are in a safe condition to the extent that this can be determined by visual inspection. Visual and other inspections shall be conducted as prescribed in the Hazardous Materials Regulations of the Department of Transportation (49 CFR Parts 171–179 and 14 CFR Part 103). Where those regulations are not applicable, visual and other inspections shall be conducted in accordance with Compressed Gas Association Pamphlets C-6-1968 and C-8-1962, which is incorporated by reference as specified in §1910.6.

(b) Compressed gases. The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in §1910.6.

c) Safety relief devices for compressed gas containers. Compressed gas cylinders, portable tanks, and cargo tanks shall have pressure relief devices installed and maintained in accordance with Compressed Gas Association Pamphlets S-1.1-1963 and 1965 addenda and S-1.2-1963, which is incorporated by reference as specified in §1910.6.

[39 FR 23502, June 27, 1974, as amended at 61 FR 9236, Mar. 7, 1996]

['HAZWOPER', 'Hazardous Materials Safety - OSHA', 'Specialized Industries', 'Toxic and Hazardous Substances - OSHA']
['Spraying/Spray Finishing', 'Explosives and Blasting', 'Process Safety Management', 'Dipping and Coating', 'HAZWOPER Emergency Response', 'Hazardous Materials Safety - OSHA', 'Hydrogen', 'Oxygen', 'Flammable Liquids', 'Anhydrous Ammonia', 'Liquefied Petroleum Gases', 'Compressed Gases', 'HAZWOPER', 'Toxic and Hazardous Substances - OSHA', 'Hazardous Waste Cleanup Operations', 'Hazardous Waste Treatment, Storage, and/or Disposal']
UPGRADE TO CONTINUE READING