Compliance Just Got Easier: Stay ahead of regulatory changes with instant notifications on updates that matter.
['General Packaging Requirements - Hazmat']
['General Packaging Requirements - Hazmat']
09/29/2026
(a) To certify that the tank complies with all specification requirements, each tank shall be plainly and permanently stamped in letters and figures 3/8 inch high into the metal of valve end chime as follows:
(1) DOT Specification number.
(2) Material and cladding material if any (immediately below the specification number).
(3) Owner’s or builder’s identifying symbol and serial number (immediately below the material identification). The symbol shall be registered with the Bureau of Explosives, duplications are not authorized.
(4) Inspector’s official mark (immediately below the owner’s or builder’s symbol).
(5) Date of original tank test (month and year, such as 1-64 for January 1964). This should be so placed that dates of subsequent tests may easily be added thereto.
(6) Water capacity—0000 pounds.
(b) A copy of the above stamping in letters and figures of the prescribed size stamped on a brass plate secured to one of the tank heads is authorized.
['General Packaging Requirements - Hazmat']
['General Packaging Requirements - Hazmat']
UPGRADE TO CONTINUE READING
ezExplanations
Results Aided by AI
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2026 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
