['General Packaging Requirements - Hazmat']
['General Packaging Requirements - Hazmat']
10/14/2024
...
Pyrophoric Class 7 (radioactive) materials, as referenced in the §172.101 Table of this subchapter, in quantities not exceeding A2 per package must be transported in DOT Specification 7A packagings constructed of materials that will not react with, nor be decomposed by, the contents. Contents of the package must be —
(a) In solid form and must not be fissile unless excepted by §173.453;
(b) Contained in sealed and corrosion resistant receptacles with positive closures (friction or slip-fit covers or stoppers are not authorized);
(c) Free of water and contaminants that would increase the reactivity of the material; and
(d) Inerted to prevent self-ignition during transport by either —
(1) Mixing with large volumes of inerting materials, such as graphite, dry sand, or other suitable inerting material, or blended into a matrix of hardened concrete; or
(2) Filling the innermost receptacle with an appropriate inert gas or liquid.
(e) Pyrophoric Class 7 (radioactive) materials transported by aircraft must be packaged in Type B packages.
[Amdt. 173–244, 60 FR 50307, Sept. 28, 1995, as amended at 68 FR 45038, July 31, 2003; 70 FR 56098, Sept. 23, 2005]
READ MORESHOW LESS
['General Packaging Requirements - Hazmat']
['General Packaging Requirements - Hazmat']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.