['Water Programs']
['Water Quality', 'Underground Injection Control', 'Safe Drinking Water']
05/09/2022
...
Maximum injection pressure. The owner or operator shall limit injection pressure to the lesser of:
(a) A value which will not exceed the operating requirements of §144.28(f)(3)(i) or (ii) as applicable; or
(b) A value for well head pressure calculated by using the formula:
Pm = (0.733-0.433 Sg)d
where
Pm = injection pressure at the wellhead in pounds per square inch
Sg = specific gravity of injected fluid (unitless)
d = injection depth in feet.
READ MORESHOW LESS
['Water Programs']
['Water Quality', 'Underground Injection Control', 'Safe Drinking Water']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.