['Air Programs']
['Air Emissions']
10/12/2023
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
The following requirements apply for any nozzle installation used for dispensing gasoline into motor vehicles:
(a) Nozzles must meet the following hardware specifications:
(1) The outside diameter of the terminal end must not be greater than 21.3 mm.
(2) The terminal end must have a straight section of at least 63 mm.
(3) The retaining spring must terminate at least 76 mm from the terminal end.
(b) The dispensing flow rate must not exceed a maximum value of 10 gallons per minute. The flow rate may be controlled through any means in the pump/dispenser system, as long as it does not exceed the specified maximum value.
[85 FR 78469, Dec. 4, 2020; 88 FR 4718, Jan. 24, 2023]
READ MORESHOW LESS
['Air Programs']
['Air Emissions']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.