['General Packaging Requirements - Hazmat']
['General Packaging Requirements - Hazmat']
10/14/2024
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
(a) Each specimen (i.e., sample, prototype or scale model) must be examined before testing to identify and record faults or damage, including:
(1) Divergence from the specifications or drawings;
(2) Defects in construction;
(3) Corrosion or other deterioration; and
(4) Distortion of features.
(b) Any deviation found under paragraph (a) of this section from the specified design must be corrected or appropriately taken into account in the subsequent evaluation.
(c) The containment system of the packaging must be clearly specified.
(d) The external features of the specimen must be clearly identified so that reference may be made to any part of it.
READ MORESHOW LESS
['General Packaging Requirements - Hazmat']
['General Packaging Requirements - Hazmat']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.