['Air Programs']
['Air Emissions']
10/12/2023
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
(a) Except as specified in paragraph (b) and (c) of this section, diesel fuel additives blended into diesel fuel that is subject to the standards in §1090.305 must have a sulfur concentration less than or equal to 15 ppm on a per-gallon basis.
(b) Diesel fuel additives do not have to comply with paragraph (a) of this section if all the following conditions are met:
(1) The additive is added to diesel fuel in a quantity less than 1.0 volume percent of the resultant mixture of additive and diesel fuel.
(2) The PTD for the diesel fuel additive complies with the requirements in §1090.1120(b).
(3) The additive is not commercially available as a retail product for ultimate consumers.
(c) The provisions of this section do not apply to additives used with 500 ppm LM diesel fuel or ECA marine fuel.
[85 FR 78469, Dec. 4, 2020]
READ MORESHOW LESS
['Air Programs']
['Air Emissions']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.