['Air Programs']
['Air Emissions']
03/22/2023
...
The following restrictions apply for using emission credits:
(a) Averaging sets. Emission credits may be exchanged only within an averaging set. For emission credits generated by Tier 4 engines, there are two averaging sets - one for engines at or below 560 kW and another for engines above 560 kW.
(b) Emission credits from earlier tiers of standards. (1) For purposes of ABT under this subpart, you may not use emission credits generated from engines subject to emission standards identified in appendix I of this part, except as specified in §1039.102(d)(1) or as follows:
If the maximum power of the credit-generating engine is * * * | And it was certified to the following standards identified in appendix I of this part * * * | Then you may use those banked credits for the following Tier 4 engines * * * |
---|---|---|
(i) kW < 19 | Tier 2 | kW < 19. |
(ii) 19 ≤ kW < 37 | Tier 2 | kW ≥ 19. |
(iii) 37 ≤ kW ≤ 560 | Tier 3 | kW ≥ 19. |
(iv) kW > 560 | Tier 2 | kW ≥ 19. |
(2) Emission credits generated from marine engines certified to the standards identified in appendix I of this part for land-based engines may not be used under this part.
(c) NOXand NOX NMHC emission credits. You may use NO X emission credits without adjustment to show compliance with NO X NMHC standards. You may use NO X NMHC emission credits to show compliance with NO X standards, but you must adjust the NO X NMHC emission credits downward by twenty percent when you use them, as shown in the following equation:
NO X emission credits = (0.8) × (NO X NMHC emission credits).
(d) Other restrictions. Other sections of this part specify additional restrictions for using emission credits under certain special provisions.
[69 FR 39213, June 29, 2004, as amended at 70 FR 40464, July 13, 2005; 81 FR 74140, Oct. 25, 2016; 86 FR 34506, Jun. 29, 2021]
READ MORESHOW LESS
['Air Programs']
['Air Emissions']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.