['Air Programs']
['Air Emissions']
07/08/2024
...
(a) The provisions of this section apply separately for calculating emission credits for each pollutant.
(b) For each participating family or subfamily, calculate positive or negative emission credits relative to the otherwise applicable emission standard. Calculate positive emission credits for a family or subfamily that has an FEL below the standard. Calculate negative emission credits for a family or subfamily that has an FEL above the standard. Sum your positive and negative credits for the model year before rounding. Round the sum of emission credits to the nearest megagram (Mg), using consistent units with the following equation:
Emission credits (Mg) = (Std − FEL) × PL × Volume × UL × 10 −6
Where:
Std = the emission standard associated with the specific regulatory subcategory (g/ton-mile).
FEL = the family emission limit for the vehicle subfamily (g/ton-mile).
PL = standard payload, in tons.
Volume = U.S.-directed production volume of the vehicle subfamily. For example, if you produce three configurations with the same FEL, the subfamily production volume would be the sum of the production volumes for these three configurations.
UL = useful life of the vehicle, in miles, as described in §§1037.105 and 1037.106. Use 250,000 miles for trailers.
(c) As described in §1037.730, compliance with the requirements of this subpart is determined at the end of the model year based on actual U.S.-directed production volumes. Keep appropriate records to document these production volumes. Do not include any of the following vehicles to calculate emission credits:
(1) Vehicles that you do not certify to the CO2 standards of this part because they are permanently exempted under subpart G of this part or under 40 CFR part 1068.
(2) Exported vehicles, even if they are certified under this part and labeled accordingly.
(3) Vehicles not subject to the requirements of this part, such as those excluded under §1037.5.
(4) Any other vehicles, where we indicate elsewhere in this part 1037 that they are not to be included in the calculations of this subpart.
[86 FR 34491, Jun. 29, 2021; 88 FR 4653, Jan. 24, 2023]
READ MORESHOW LESS
['Air Programs']
['Air Emissions']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.