['CMV Parts and Maintenance']
['CMV lights, reflectors, and reflective tape']
08/01/2024
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
(108)(16) S5.5.1 and S5.5.2 of TSD 108 do not apply to a motorcycle that is fitted with a single beam headlamp.
(108)(17) Subject to subsection (18), the headlamp, tail lamp and licence plate lamp of a motorcycle shall be continuously activated when the engine is operating.
(108)(18) The headlamp, tail lamp and licence plate lamp of a motorcycle may remain off after the engine is started until the motorcycle is set in motion by its own power for the first time.
(108)(19) In addition to being activated in accordance with the requirements of S5.5.7 of TSD 108, the lamps referred to in S5.5.7(a) of TSD 108 shall be activated when
(108)(19)(a) the front fog lamps on the vehicle are activated in a steady-burning state other than as daytime running lamps; or
(108)(19)(b) the rear fog lamps on the vehicle are activated in a steady-burning state.
(108)(20) The requirements of S5.5.11 of TSD 108 are replaced by the daytime running lamp requirements of subsections (44) to (65).
READ MORESHOW LESS
['CMV Parts and Maintenance']
['CMV lights, reflectors, and reflective tape']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.