['CMV Parts and Maintenance']
['CMV lights, reflectors, and reflective tape']
08/01/2024
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
(108)(14) For the purposes of S5.3 and Table II of TSD 108, the location of rear identification lamps on a van trailer with side-opening rear doors conforms to that section if the lamps are located as close as practicable to the top of the vehicle
(108)(14)(a) above or on the rear doors, if the vertical face of the header rail, measured on the vertical centreline of the vehicle, extends at least 25 mm above the rear doors; or
(108)(14)(b) above or below or on the rear doors, if the vertical face of the header rail, measured on the vertical centreline of the vehicle, extends less than 25 mm above the rear doors.
(108)(14)(14.1) Despite S5.3 and Table IV of TSD 108, the tail lamps, stop lamps and parking lamps on a motor tricycle shall be installed in accordance with the requirements of S5.3 and Table IV of TSD 108 for tail lamps, stop lamps and parking lamps installed on a passenger car.
(108)(15) [Reserved]
READ MORESHOW LESS
['CMV Parts and Maintenance']
['CMV lights, reflectors, and reflective tape']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.