['CMV Parts and Maintenance']
['CMV lights, reflectors, and reflective tape']
08/01/2024
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.
...
General
(108)(1) Every passenger car, multi-purpose passenger vehicle, truck, bus, motorcycle and trailer shall be equipped with the lamps, retroreflective devices and associated equipment required by Technical Standards Document No. 108, Lamps, Reflective Devices and Associated Equipment (TSD 108), as amended from time to time.
(108)(1.1) Every three-wheeled vehicle shall be equipped with the lamps, retroreflective devices and associated equipment required by TSD 108 for passenger cars.
(108)(2) Every restricted-use motorcycle shall be equipped with the reflex reflectors required for motorcycles by S5.1.1 of TSD 108.
(108)(3) Lamps, retroreflective devices and associated equipment required by this section shall be designed, installed and visible in accordance with the requirements of TSD 108, except Figures 11 to 14, 16, 18, 21 and 22.
(108)(4) Lamps, retroreflective devices and associated equipment on a vehicle may conform to the applicable SAE standards and recommended practices contained in the 1994 SAE Handbook instead of the applicable SAE standards and recommended practices referred to in this section or TSD 108.
(108)(5) All the information regarding every type of bulb and every type of sealed beam lamp used in lighting equipment required by this section shall be
(108)(5)(a) specified for the type of bulb or sealed beam lamp in
(108)(5)(a)(i) a standard or recommended practice issued by the SAE,
(108)(5)(a)(ii) a regulation issued by the ECE, or
(108)(5)(a)(iii) a standard issued by the International Electrotechnical Commission (IEC); or
(108)(5)(b) provided by the vehicle manufacturer to the Minister, at the Minister's request.
(108)(6) Wherever the word "filament" appears in this section, TSD 108 or an SAE standard or recommended practice, it may be read as "arc" if the requirement applies to a lamp in which light is produced by a gaseous discharge tube, or as "light-emitting diode junction" if the requirement applies to a lamp in which light is produced by a light-emitting diode.
(108)(7) For the purposes of this section, the expression "motor driven cycle" used in TSD 108 means "limited-speed motorcycle".
READ MORESHOW LESS
['CMV Parts and Maintenance']
['CMV lights, reflectors, and reflective tape']
Load More
J. J. Keller is the trusted source for DOT / Transportation, OSHA / Workplace Safety, Human Resources, Construction Safety and Hazmat / Hazardous Materials regulation compliance products and services. J. J. Keller helps you increase safety awareness, reduce risk, follow best practices, improve safety training, and stay current with changing regulations.
Copyright 2024 J. J. Keller & Associate, Inc. For re-use options please contact copyright@jjkeller.com or call 800-558-5011.