The correct answers for the quiz are shown in bold:

1. Work with a qualified person, such as __________, to identify approved anchor points on the jobsite and to ensure they’re capable of supporting 5,000 pounds. The entire fall protection system depends on an adequate anchor point.

A. An engineer

B. An affected person

C. A confined space attendant

D. An apprentice

2. Double-check with the __________ and get written approval and engineering specifications showing the horizontal rail is rated adequately.

A. Host employer

B. Work permit

C. SDS

D. Manufacturer

3. Ensure job-made anchor points are welded by a __________ and approved by a professional engineer. Using job-made anchor points is common in building maintenance, especially with tank work.

A. Competent Welder

B. Certified Welder

C. ANSI-approved Welder

D. Experienced Welder

4. OSHA section 1910.140(c)(13)(i) says that an anchor point must be capable of supporting __________ for each worker.

A. 2,000 pounds

B. 4,000 pounds

C. 5,000 pounds

D. 10,000 pounds

5. OSHA only requires that the handrail be capable of supporting __________.

A. 200 pounds

B. 500 pounds

C. 800 pounds

D. 1,000 pounds

6. When using a horizontal lifeline for an anchor point, it too must be installed properly. The steel cable __________.

A. Must have an adequate diameter

B. Clips must be installed properly (usually three at each end with proper spacing)

C. Must not have been used for lifting purposes

D. All the above